We present a general approach to fabricate metal/TiO2 core/shell nanorod structures by twostep electrodeposition. Firstly, TiO2 nanotubes with uniform wall thickness are prepared in anodic aluminum oxide （AAO） membranes by electrodeposition. The wall thickness of the nanotubes could be easily controlled by modulating the deposition time, and their outer diameter and length are only limited by the channel diameter and the thickness of the AAO membranes, respectively. The nanotubes＇ tops prepared by this method are open, while the bottoms are connected directly with the Au film at the back of the AAO membranes. Secondly, Pd, Cu, and Fe elements are filled into the TiO2 nanotubes to form core/shell structures. The core/shell nanorods prepared by this two-step process are high density and free-standing, and their length is dependent on the deposition time.
Morphological evolution of Pd nanoparticles was studied in a solution-phase synthesis using cetyltrimethylammonium bromide （CTAB） and CTAB/sodium citrate mixture as capping agents, respectively. The morphological diversity of Pd nanoparticles is the combined effect of different Pd twinned seeds formed in the nucleation stage and selectively enlarging one set of crystallographic facets in the growth stage, both of which can be affected by the concentrations of CTAB. Through changing the concentrations of CTAB and sodium ascorbate, Pd nanoparticles with different shapes were obtained. When citrate ions were introduced to manipulate the nucleation and growth process, star-shaped icosahedra and nanorods with pentagram cross-sections were obtained. Pd nanoparticles with different shapes have quite different surface plasmon resonance and surface-enhanced Raman scattering properties.
