To develop novel β-type biomedical titanium alloys,a series of Ti-15Mo-xNb alloys（x=0,5,10 and 15,mass fraction in%） were designed and prepared by using vacuum arc melting method.The present study focused on the effect of Nb addition on the microstructure,mechanical properties and castability of Ti-15 Mo alloy.Phase analysis and microstructure observation show that all the alloys consist of single β phase and the equiaxed β grain is refined with increasing Nb content.These β-type Ti-15Mo-xNb alloys exhibit good plasticity and rather low compression elastic modulus（in the range of 18.388-19.365 GPa）.After Nb addition,the compression yield strength of the alloys increases.With increasing Nb content,the micro-hardness of the alloys decreases.The alloys exhibit obvious fibrous strip microstructure after cold compression deformation.The castability test shows that the castability of the alloys after Nb addition decreases and that of the Ti-15 Mo alloy is the highest（92.01%）.
目的:研究黑龙江省不同医疗机构之间新型协同服务模式,加强垦区各级医疗机构的信息化基础建设,建立基于医学影像存档与通信传输系统(Picture Archiving and Communications System,PACS)的数字化医疗区域。方法:将哈尔滨医科大学附属第四医院现有的影像数据归档,集成到IMPAX PACS数据中心(Internet Data Center,IDC),作为整个区域医疗的影像中心。通过IDC交换平台的延伸覆盖,以及医院信息系统(Hospital Information System,HIS)与XERO集成,可经网络调阅IDC中的影像,实现远程影像会诊。结果:建立基于IMPAX PACS的区域医疗;工程覆盖1家省会大医院和垦区2家综合性医院、5家二级医院、11家农场医院,实现联网医院间的影像学远程会诊。结论:PACS区域远程医疗系统的建立为基层百姓就医提供方便,影像学远程会诊可有效避免影像学重复检查,双向转诊、信息共享给患者带来更多的便利和实惠,具有巨大的社会效益。
