Surface texturing has been considered as an effective approach to improve the tribological performances.Based on the consideration of enhancing the tribological performance,the experiments are carried out to investigate tribological performance of triangular textures in water lubrication.The textures are generated by the Nd:YAG laser marking system,with an area density of 20%and a depth of 7 m and are distributed uniformly on the surface of the SiC rings.Compared with the circular textures,the triangular textures have obvious tribological anisotropy.The triangular textures in clockwise direction show the best friction reduction effect among the three textures.The friction reduction mechanisms of the triangular textures in clockwise direction are also analyzed and discussed.
XIE YiLI YongJianWANG YuMingSUO ShuangFuLIU XiangFeng
A mass-conservative average flow model based on the finite element method(FEM) is introduced to predict the performances of textured surfaces applied in mechanical seals or thrust bearings.In this model,the Jakobsson-Floberg-Olsson(JFO) boundary conditions are applied to the average flow model for ensuring the mass-conservative law.Moreover,the non-uniform triangular grid is utilized,which can deal with the problem of complex geometric shapes.By adopting the modeling techniques,the model proposed here is capable of dealing with complex textured surfaces.The algorithm is proved correct by the numerical experiment.In addition,the model is employed to gain further insight into the influences of the dimples with different shapes and orientations on smooth and rough surfaces on the load-carrying capacity.
XIE YiLI YongJianSUO ShuangFuLIU XiangFengLI JingHaoWANG YuMing
