The HY-2 satellite carrying a satellite-borne GPS receiver is the first Chinese radar altimeter satellite, whose radial orbit determination precision must reach the centimeter level. Now HY-2 is in the test phase so that the observations are not openly released. In order to study the precise orbit determination precision and procedure for HY-2 based on the satellite- borne GPS technique, the satellite-borne GPS data are simulated in this paper. The HY-2 satellite-borne GPS antenna can receive at least seven GPS satellites each epoch, which can validate the GPS receiver and antenna design. What's more, the precise orbit determination processing flow is given and precise orbit determination experiments are conducted using the HY-2-borne GPS data with both the reduced-dynamic method and the kinematic geometry method. With the 1 and 3 mm phase data random errors, the radial orbit determination precision can achieve the centimeter level using these two methods and the kinematic orbit accuracy is slightly lower than that of the reduced-dynamic orbit. The earth gravity field model is an important factor which seriously affects the precise orbit determination of altimeter satellites. The reduced-dynamic orbit determination experiments are made with different earth gravity field models, such as EIGEN2, EGM96, TEG4, and GEMT3. Using a large number of high precision satellite-bome GPS data, the HY-2 precise orbit determination can reach the centimeter level with commonly used earth gravity field models up to above 50 degrees and orders.
On the basis of Space-Wise Least Square method, three numerical methods including Cholesky de- composition, pre-conditioned conjugate gradient and Open Multi-Processing parallel algorithm are applied into the determination of gravity field with satellite gravity gradiometry data. The results show that, Cholesky de- composition method has been unable to meet the requirements of computation efficiency when the computer hardware is limited. Pre-conditioned conjugate gradient method can improve the computation efficiency of huge matrix inversion, but it also brings a certain loss of precision. The application of Open Multi-Processing parallel algorithm could achieve a good compromise between accuracy and computation efficiency.