This paper presents a novel in-plane photonic crystal channel drop filter. The device is composed of a resonant cavity sandwiched by two parallel waveguides. The cavity has two resonant modes with opposite symmetries. Tuning these two modes into degeneracy causes destructive interference in bus waveguide, which results in high forward drop efficiency at the resonant wavelength. From the result of numerical analysis by using two-dimensional finite-difference time-domain method, the channel drop filter has a drop efficiency of 96% and a Q value of over 3000, which can be used in dense wavelength division multiplexing systems.
The effect of silver nanostructures prepared by nanosphere lithography on the photoluminescence（PL） properties of blue-emitting In Ga N/Ga N quantum wells（QWs） is studied. Arrays of silver nanoparticles are fabricated to yield a collective surface plasmonic resonance（SPR） near to the QWs emission wavelength. A large enhancement in peak PL intensity is observed, when the induced SPR wavelength of the nanoparticles on the QWs sample matches the QWs emission wavelength. The study proves that the SPRs could enhance the light emission efficiency of semiconductor material.
We demonstrate the fabrication of hexagonal nano-pillar arrays at the surface of GaN-based light-emitting diodes （LEDs） by nanosphere lithography. By varying the oxygen plasma etching time, we could tune the size and shape of the pillar. The nano-pillar has a truncated cone shape. The nano-pillar array serves as a gradual effective refractive index matcher, which reduces the reflection and increases light cone. It is found that the patterned surface absorbs more pumping light. To compare extraction efficiencies of LEDs, it is necessary to normalize the photoluminescence power spectrum with total absorption rate under fixed pumping power, then we could obtain the correct enhancement factor of the photoluminescence extraction efficiency and optimized structure. The highest enhancement factor of the extraction efficiency is 10.6.
