Polyfluorene (PF) film has been successfully electropolymerized at lower potential (0.91 V vs.Ag/AgCl) in the mixed electrolyte of boron trifluoride diethyl etherate and trifluoroacetic acid.The PF film is characterized to have about 10 repeat units and no presence of ketonic defect site.UV-vis and photoluminescent spectral studies indicate that the PF film is blue light emitting.From cyclic voltammetry and galvanostatic charge-discharge tests in 1 M lithium perchlorate/acetonitrile electrolyte,the polyfluorene/activated carbon electrode shows a specific capacitance of 227.1 F g-1 (per active layer mass) and reversible redox reaction at the potential of 1.4 V in a three electrode configuration.An asymmetric electrochemical capacitor based on this composite electrode and activated carbon electrode exhibits a specific energy of 14.7 Wh kg-1 (per active layer mass).These results indicate that electrochemically prepared polyfluorene could be used as energy storage component for electrochemical application.
LIU WeiSUN MingLiangWANG WeiSONG LingXiaGE HongLunSUN MiaoZHANG QingJie
Conjugated ployfluorene with 2-（2-（2-methoxyethoxy）ethoxy）ethyl groups （EO-PF） is prepared by the palladium- catalyzed Suzuki coupling reaction. The polymer is purified carefully by a simple chemical procedure. The inductively coupled plasma （ICP） test shows palladium-catalyst in the polymer can be removed by this procedure. The thermal properties, electrochemical properties, UV-Vis absorption properties, photoluminescence properties and electroluminescent properties of the polymer without （EO-PF1） or with purification （EO-PF2） are studied. EO-PF2 shows better PL CIE coordinates in THF solutions as blue light-emitting materials and better photoluminescence stability in thin solid films. Polymer light emitting diodes and electrochemical cells based on EO-PF2 exhibit somewhat improved optoelectronic performance than control devices of EO-PF 1.
