We design and experimentally demonstrate a broadband metamaterial absorber in the terahertz （THz） band based on a periodic array of aluminum （A1） squares with two different sizes. A thin silicon dioxide （SiO2） film rather than a conventional polyimide （PI） layer is used as a dielectric spacer to separate A1 squares from the platinum （Pt） ground plane in our design, which significantly improves the design precision and the feasibility of the device fabrication. The combination of different sizes of AI squares gives rise to an absorption bandwidth of over 210 GHz with an absorption of over 90%. Our results also show that our device is almost polarization-insensitive. It works very well for all azimuthal angles with an absorption of beyond 80%.
VO_2 thin films were grown on silicon substrates using Al_2O_3 thin films as the buffer layers. Compared with direct deposition on silicon, VO_2 thin films deposited on Al_2O_3 buffer layers experience a significant improvement in their microstructures and physical properties. By optimizing the growth conditions, the resistance of VO_2 thin films can change by four orders of magnitude with a reduced thermal hysteresis of 4 °C at the phase transition temperature. The electrically driven phase transformation was measured in Pt/Si/Al_2O_3/VO_2/Au heterostructures. The introduction of a buffer layer reduces the leakage current and Joule heating during electrically driven phase transitions. The C–V measurement result indicates that the phase transformation of VO_2 thin films can be induced by an electrical field.
We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. The designed polarization beam splitter can split TE-polarized and TM-polarized THz waves into different propagation directions. The simulation results show that the extinction ratios are larger than 18.36 dB for TE polarization and 13.35 dB for TM polarization in the frequency range from 1.86 THz to 1.91 THz, respectively. The designed polarization beam splitter has the advantages of small size and compact structure with a total size of 4.825 mm×0.400 mm.
