A mathematical model for heap bioleaching is developed to analyze heat transfer,oxygen flow,target ion distribution and oxidation leaching rate in the heap.The model equations are solved with Comsol Multiphysics software.Numerical simulation results show the following facts:Concentration of oxygen is relatively high along the boundary of the slope,and low in the center part where leaching rate is slow.Temperature is relatively low along the slope and reaches the highest along the bottom region near the slope,with difference being more than 6 C.Concentration of target mental ions is the highest in the bottom region near the slope.Oxidation leaching rate is relatively large in the bottom and slope part with a fast reaction rate,and small in the other part with low oxygen concentration.
Bioleaching processes cause dramatic changes in the mechanical and chemical properties of waste rocks, and play an important role in metal recovery and dump stability. This study focused on the characteristics of waste rocks subjected to bioleaching. A series of experiments were conducted to investigate the evolution of rock properties during the bioleaching process. Mechanical behaviors of the leached waste rocks, such as failure patterns, normal stress, shear strength, and cohesion were determined through mechanical tests. The results of SEM imaging show considerable differences in the surface morphology of leached rocks located at different parts of the dump. The mineralogical content of the leached rocks reflects the extent of dissolution and precipitation during bioleaching. The dump porosity and rock size change under the effect of dissolution, precipitation, and clay transportation. The particle size of the leached rocks decreased due to the loss of rock integrity and the conversion of dry precipitation into fine particles.
Sheng-hua YinAi-xiang WuShao-yong WangChun-ming Ai
This paper dealt with the development of a two-dimensional(2D)mathematical model for column leaching and confirmed the important simulation parameters through experiment.The unsaturated state of the variably saturated flow column and the solute transport of copper ions were studied during leaching.The fluid flow problem was handled using the Richards equation on the premise of an ambient pressure column air,where the van Genuchten formulas were applied to define the nonlinear relationships of pressure head with the retention and permeability properties.The ore column permeability test gave a varied hydraulic conductivity,which was analyzed in the model.In the solute transport problem,the copper ion concentration was solved using the advection-diffusion-reaction equation whose reaction term was determined by the joint analysis of experimental copper leaching rate and the shrinking core model.Particle-and column-scale leaching tests were carried out to illustrate the difference and connection of copper extraction in both processes.This fluid flow and solute transport coupled model was determined through the finite element method using the numerical simulation software,COMSOL Multiphysics.
Xiu-xiu MiaoAi-xiang WuBao-hua YangJin-zhi LiuSheng-hua YinHong-jiang Wang
Bio-leaching of pyrite by native strains of acidophilic bacteria was examined by laboratory scale tests.Three groups of batch trials in agitated fiasks and three continuous column leaching tests were performed.The leaching ability and efficiency of native bacteria was greatly improved by adaptation of the bacteria to the test conditions.These cultivated bacteria were then used for the leaching process.The changes in solution pH,Eh,Fe2+ concentration,and sulfate ion concentration were monitored throughout the tests.A portion of the pyritic sulfur is transformed into soluble sulfate ion.The desulfurization ratio of 42.6% was obtained in a fiask shaking test and a ratio of 39.4% was obtained during column leaching.A weight gain test was performed on leached and unleached samples by exposing the samples to humid air for several days.A smaller weight gain of the bioleached samples indicates that removing sulfur from the sulphide ore helps reduce its oxidation rate and the potential for spontaneous combustion.
