A new adaptive variable stiffness absorber was proposed based on a smart material, magnetorheological elastomer (MRE), and its vibration control performance was investigated. Before developing the proposed absorber, the MREs were firstly fabricated by curing a mixture of 704 silicon rubber, carbonyl iron particles and a small amount of silicone oil under an external magnetic field. Then the mechanical properties of the fabricated MREs were measured. On the basis of the measured mechanical characteristics, the MRE absorber was developed and its working characteristics were also tested under various input currents and excited frequencies. Finally, the control responses of a two-degree-of-freedom dynamic system with a MRE absorber were presented under a chirp input and used to evaluate the effectiveness of the MRE absorber.
Magnetorheological elastomer （MRE） is a new kind of smart materials, the rheological properties can be controlled rapidly by the external magnetic field. It is mainly composed of rubber and micron-sized ferromagnetic particles, which forms a chain-like structure. Therefore its mechanical, electric, and magnetic properties can be changed by the applied magnetic field, which is called as the magneto-induced effect. But this effect is not remarkable enough currently for the engineering application. So it is important for material preparation to optimize parameters to enhance the magneto-induced effect. In this work, based on chain-like model, some factors influencing the magneto-induced effect of MRE were analyzed theoretically by using dipole method with the normal distribution of chain＇s angle introduced. The factors included the oblique angle of particles chains, magnetic field intensity, and shear strain, etc. Some experiments were also carried out.
A magneto-rheological（MR） semi-active suspension system with the controllable damping forces has received more attention in reducing the vibration of a vehicle. However, many control strategies only discussed one or two vibration states of the vehicle based on a quarter-car model or a half vehicle model via MR suspensions. They cannot provide a satisfying whole-vehicle performance on a road test. Hence, a full car vibration model via an MR suspension system is proposed. To reduce the heave, pitch and roll motion of the vehicle body and the vertical vibration of four wheels, a fuzzy hybrid controller for vibration attitude of full car via MR suspensions is proposed. First, a skyhook-fuzzy control scheme is designed to reduce the heave, roll and pitch motion of the vehicle body. Second, a revised ground hook control strategy is adopted to decrease the vertical vibration of the wheels. Finally, a hybrid control scheme based on a fuzzy reasoning method is proposed to tune the hybrid damping parameter, which is suitable for coordination the attitude of the vehicle body and the wheels. A test and control system for the vibration attitude of full car is set up. It is implemented on a car equipped with four MR suspensions. The results on random highway and rough road indicate that the fuzzy hybrid controller can decrease the vibration accelerations of the vehicle body and the wheels to 65%-80% and 80%-90%, respectively. It reduces the automotive vibrations of heave, roll and pitch more effectively than a passive suspension and an MR suspension with a traditional hybrid control scheme so that it achieves better ride comfort and road holding concurrently. This paper proposes a new fuzzy hybrid control（FHC） method for reducing vibration attitude of full car via MR suspensions and develops a road test to evaluate the FHC.
