A 2.45 GHz electron cyclotron resonance intense proton source and a low energy beam transport line with dual-Glaser lens were designed and fabricated by Institute of Modern Physics for a compact pulsed hadron source at Tsinghua. The intense proton beams extracted from the ion source are transported through the transport line to match the downstream radio frequency quadrupole accelerator. Particle-in-cell code BEAMPATH was used to carry out the beam transport simulations and optimize the magnetic field structures of the transport line. Emittance growth due to space charge and spherical aberrations of the Glaser lens were studied in both theory and simulation. The results show that narrow beam has smaller aberrations and better beam quality through the transport line. To better match the radio frequency quadrupole accelerator, a shorter transport line is desired with sufficient space charge neutralization.
YANG YaoLIU ZhanwenZHANG WenhuiMA HongyitZHANG XuezhenZHAO HongweiYAO Zeen
The transport characteristics of a space chargedominated multi-species deuterium beam consisting of D_1^+,D_2^+, and D_3^+ particles in an electrostatic low-energy beam line are studied. First, the envelope equations of the primary D_1^+ beam are derived considering the space charge effects caused by all particles. Second, the evolution of the envelope of the multi-species deuterium beam is simulated using the PIC code TRACK, with the results showing a significant effect of the unwanted beam on the transport of the primary beam. Finally, different injected beam parameters are used to study beam matching, and a new beam extraction system for the existing duoplasmatron source is designed to obtain the ideal injected beam parameters that allow a D_1^+ beam of up to 50 m A to pass unobstructed through the electrostatic low-energy beam transport line in the presence of an unwanted(D_2^+, D_3^+)beam of 20 m A; at the same time, distortions of the beam emittance and particle distributions are observed.
Xiao-Long LuYu ZhangJun-Run WangZhi-Wu HuangZhan-Wen MaYao YangZe-En Yao
In this paper, model-predictive control(MPC) is proposed for controlling power source of accelerators. The system state equation is employed as the predictive model. With MPC, the difference between possible output and the ideal output is forecasted and decreased, so that the system can trace the ideal trail as closely and quickly as possible. The results of simulations and experiments show that this method can reduce influence of low frequency noise.
A novel simple method based on pulse area analysis(PAA) is presented for acquisition of nuclear spectra by a digitizer. The PAA method can be used as a substitute for the traditional method of pulse height analysis(PHA). In the PAA method a commercial digitizer was employed to sample and sum in the pulse, and the area of the pulse is proportional to the energy of the detected radiation. The results of simulation and experiment indicate the great advantages of the PAA method, especially as the count rate is high and the shaping time constant is small.When the shaping time constant is 0.5 μs, the energy resolution of PAA is about 66% better than that of PHA.
