The efficiency and effectiveness of solar energy capture and storage are to a large extent functions of the heat transfer and storage capacity of the medium used. This paper investigates the potential of using carbon nanotube （CNT）-glycol nanosuspension as such a medium, prepared by freeze dryingultrasonic dispersing after oxidation treatment with HNO3. The influences of the mass fraction of CNTs glycol nanofluids and temperatures on photo-thermal properties, thermal conductivities and rheological behavior were investigated. The results show that CNTs with oxidation treatment exhibited good dispersing performance. Strong optical absorption of the CNTs glycol nanofluids was detected in the range of 200-2500 nm. At room temperature, 18% enhancement was found in the photo-thermal conversion efficiency of the 0.5% mass fraction CNTs glycol nanofluids in comparison to the basic fluids, without significant increase in viscosity. At 55 ℃, CNTs glycol nanofluids with 4.0% mass fraction exhibited much lower viscosity and 25.4% higher thermal conductivity in comparison to that of pure glycol at room temperature.
Zhaoguo MengDaxiong WuLiangang WangHaitao ZhuQingling Li
Well-dispersed BaSO4 nanoparticles were synthesized in the presence of sodium polyacrylate （PAAS） by a simple precipitation method, with BaCl2 and （NH4）2SO4 as reactants. The different roles performed by PAAS in the synthesis of BaSO4 nanoparticles were investigated using X-ray diffractometry, Fourier transform infrared spectroscopy, and transmission electron microscopy. The results indicate that the assynthesized BaSO4 nanoparticles were spheres with an average diameter of 30 nm and that their surfaces were affected by the PAAS. Under a typical procedure employed, PAAS reacted with BaCl2 to yield an intermediate, serving as a control releasing agent and separating the nucleation and crystal growth processes of the BaSO4 nuclei. During formation of the BaSO4 nanospheres, the intermediate slowly dissolved and released barium and polyacrylate ions, inhibiting the growth and aggregation of newly formed BaSO4 seeds and resulting in particles of narrow diameter distribution and improved dispersibility. Moreover, these polyacrylate ions further modified the surfaces of the BaSO4 nanoparticles.
