Polyimide(PI)film is an important type of insulating material used in inverter-fed motors.Partial discharge(PD)under a sequence of high-frequency square impulses is one of the key factors that lead to premature failures in insulation systems of inverter-fed motors.In order to explore the damage mechanism of PI film caused by discharge,an aging system of surface discharge under bipolar continuous square impulse voltage(BCSIV)is designed based on the ASTM 227501 standard and the electrical aging tests of PI film samples are performed above the partial discharge inception voltage(PDIV).The chemical bonds of PI polymer chains are analyzed through Fourier transform infrared spectroscopy(FTIR)and the dielectric properties of unaged and aged PI samples are investigated by LCR testers HIOKI 3532-50.Finally,the micro-morphology and micro-structure changes of PI film samples are observed through scanning electron microscopy(SEM).The results show that the physical and chemical effects of discharge cut off the chemical bonds of PI polymer chains.The fractures of ether bond(C–O–C)and imide ring(C–N–C)on the backbone of a PI polymer chain leads to the decrease of molecular weight,which results in the degradation of PI polymers and the generation of new chemical groups and materials,like carboxylic acid,ketone,aldehydes,etc.The variation of microscopic structure of PI polymers can change the orientation ability of polarizable units when the samples are under an AC electric field,which would cause the dielectric constantεto increase and dielectric loss tanδto decrease.The SEM images show that the degradation path of PI film is initiated from the surface and then gradually extends to the interior with continuous aging.The injection charge could result in the PI macromolecular chain degradation and increase the trap density in the PI polymer bulk.
