C/C–SiC–HfC composites were fabricated via precursor infiltration and pyrolysis using a mixture solution of organic hafnium-containing polymer and polycarbosilane as precursor. The microstructures and the phases of the composites were analyzed by scanning electron microscopy and X-ray diffraction. The ablation resistance of the composites was evaluated under 3,000 °C oxyacetylene torch. After ablation for 120 s, the composites exhibit good ablation properties with the linear and mass ablation rates of 9.1 9 10-4mm/s and 1.30 9 10-3g/s, which are far lower than those of the C/C–SiC composites. The excellent ablative property of the C/C–SiC–HfC composites is resulted from the formation of HfO2 molten layer on the surface of the composites, which could play a positive role in reducing heat transfer and preventing oxygen transport to the underlying carbon substrate.
C/C-ZrC composites with continuous ZrC matrix were prepared by precursor infiltration and pyrolysis process using zirconium-containing polymer.Ablation properties of the composites were investigated by oxyacetylene flame with heat flux of 2380 and 4180 kW/m^2,respectively.The results showed that C/C-ZrC composites exhibited excellent ablation resistance under the heat flux of 2380 kW/m^2 for 120 s and a tree-coral-like ZrO_2protective layer formed after ablation.However,when the heat flux increased to 4180 kW/m^2,the maximum temperature of ablated surface reached 2500 ℃ and a strong degradation of ablation resistance was observed due to the weak bonding between the formed ZrO_2 layer and the composites.The flexural strength of C/C-ZrC composites was 110.7 ± 7.5 MPa.There were a large number of carbon fiber bundles pull-out,and the composites exhibited a pseudo-plastic fracture behavior.
To improve oxidation resistance of carbon/carbon(C/C) composites,a SiC/SiC-MoSi_2-ZrB_2 double-layer ceramic coating was prepared on C/C composites by two-step pack cementation.The phase compositions and microstructures of as-prepared multilayer coating were characterized by X-ray diffraction and scanning electron microscopy.The oxidation resistance at 1773 K and the effect of thermal shock between 1773 K and room temperature on mechanical performance of coated specimens were investigated.The results show that the SiC/SiC-MoSi_2-ZrB_2 coating exhibits dense structure and is composed of SiC,Si,MoSi_2 and ZrB_2·It can protect C/C composites from oxidation at 1773 K for more than 510 h with weight loss of 0.5%.The excellent anti-oxidation performance of the coating is due to the formation of SiO_2-ZrSiO_4 complex glassy film.The coating can also endure the thermal shocks between 1773 K and room temperature for 20 times with residual flexural strength of 86.1%.