Many researches on vehicle planar motion stability focus on two degrees of freedom（2DOF） vehicle model, and only the lateral velocity （or side slip angle） and yaw rate are considered as the state variables. The stability analysis methods, such as phase plane analysis, equilibriums analysis and bifurcation analysis, are all used to draw many classical conclusions. It is concluded from these researches that unbounded growth of the vehicle motion during unstable operation is untrue in reality thus one limitation of the 2DOF model. The fundamental assumption of the 2DOF model is that the longitudinal velocity is treated as a constant, but this is intrinsically incorrect. When tyres work in extremely nonlinear region, the coupling between the vehicle longitudinal and lateral motion becomes significant. For the purpose of solving the above problem, the effect of vehicle longitudinal velocity on the stability of the vehicle planar motion when tyres work in extremely nonlinear region is investigated. To this end, a 3DOF model which introducing the vehicular longitudinal dynamics is proposed and the 3D phase space portrait method is employed for visualization of vehicle dynamics. Through the comparisons of the 2DOF and 3DOF models, it is discovered that the vehicle longitudinal velocity greatly affects the vehicle planar motion, and the vehicle dynamics represented in phase space portrait are fundamentally different from that of the 2DOF model. The vehicle planar motion with different front wheel steering angles is further represented by the corresponding vehicle route, yaw rate and yaw angle. These research results enhance the understanding of the stability of the vehicle system particularly during nonlinear region, and provide the insight into analyzing the attractive region and designing the vehicle stability controller, which will be the topics of future works.
