Adaptive Type-2 fuzzy control possesses control performance better than the traditional adaptive fuzzy control.However,heavy computation burden obviously blocks the utilization of adaptive Type-2 fuzzy control in industrial application.By adopting novel piecewise fuzzy sets and center-average type-reduction,a simplified adaptive interval Type-2 fuzzy controller involving less computation is developed for practical industrial application.In the proposed controller,the inputs are divided into several subintervals and then two piecewise fuzzy sets are used for each subinterval.With the manner of piecewise fuzzy sets and a novel fuzzy rules inference engine,only part of fuzzy rules are simultaneously activated in one control loop,which exponentially decreases the computation and makes the controller appropriate in industrial application.The simulation and experimental study,involving the popular magnetic levitation platform,shows the predicted system with theoretical stability and good tracking performance.The analysis indicates that there is far less computation of the proposed controller than the traditional adaptive interval Type-2 fuzzy controller,especially when the number of fuzzy rules and fuzzy sets is large,and the controller still maintains good control performance as the traditional one.
A new adaptive Type-2 (T2) fuzzy controller was developed and its potential performance advantage over adaptive Type-1 (T1) fuzzy control was also quantified in computer simulation.Base on the Lyapunov method,the adaptive laws with guaranteed system stability and convergence were developed.The controller updates its parameters online using the laws to control a system and tracks its output command trajectory.The simulation study involving the popular inverted pendulum control problem shows theoretically predicted system stability and good tracking performance.And the comparison simulation experiments subjected to white noise or step disturbance indicate that the T2 controller is better than the T1 controller by 0-18%,depending on the experiment condition and performance measure.
A novel maglev transportation system was proposed for large travel range ultra precision motion.The system consists of a levitation subsystem and a propulsion subsystem.During the propulsion subsystem driving the moving platform along the guideway,the levitation subsystem uses six pairs of electromagnets to steadily suspend the moving platform over the guideway.The model of the levitation system,which is a typical nonlinear multi-input multi-output coupling system and has many inner nonlinear coupling characteristics,was deduced.For testifying the model,the levitation mechanism was firstly controlled by proportional-integral-differential(PID) control,and then a lot of input-output data were collected for model parameter identification.The least-square parameter identification method was used.The identification results prove that the model is feasible and suitable for the real system.
