Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis （INAA）, Inductively Coupled Plasma Atomic Emission Spectrometry （ICP-AES）, Cold-Vapor Atomic Absorption Spectrometry （CV-AAS） and Graphite Furnace Atomic Absorption Spectrometry （GF-AAS）. Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic suffur in vertical section indicated that： （a） the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; （b） the concentrations of Cr, Zn and Mo are higher in roof, floor and lower in coal seam; （c） the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; （d） the concentrations of Mo, V, Th and AI vary consistently with the ash yield. Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as AI, Fe, P, Ca shows that： （a） pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; （b） Mo, Se, Pb, Cr, Th, Co, Ca and A! are related to clay mineral, which is the main source of ash; （c） U, Zn, V, Na, P maybe controlled by phosphate or halite; （d） Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.
SONG DangyuQIN YongWANG WenfengZHANG JunyingZHENG Chuguang
