The interaction between geogrid and soil is crucial for the stability of geogrid-reinforced earth structure. In finite element (FE) analysis, geogrids are usually assumed as beam or truss elements, and the interaction between geogrid and soil is considered as Coulomb friction resistance, which cannot reflect the true stress and displacement developed in the reinforcement. And the traditional Lagrangian elements used to simulate soil always become highly distorted and lose accuracy in high-stress blocks. An improved geogrid model that can produce shear resistance and passive resistance and a soil model using the Eulerian technique, in combination with the coupled Eulerian-Lagrangian (CEL) method, are used to analyze the interaction between geogrid and soil of reinforced foundation test in ABAQUS. The stress in the backfill, resistance of geogrid, and settlement of foundation were computed and the results of analysis agree well with the experimental results. This simulation method is of referential value for FE analysis of reinforced earth structure.
Model tests and numerical analyses of stepped reinforced retaining wall were performed to investigate the effects of rheology of backfill and creep of geogrids on the long-term performance of the structure.The geogrid tensions,soil pressures,wall deformations and foundation pressure were measured during model construction and loading.A visco-elasto-plastic model and an empirical nonlinear visco-elastic model were utilized to simulate the stresses and deformations of geogrid-reinforced earth-retaining wall under long-term loads.By comparing test data with numerical results,it is shown that the foundation pressure distribution is nonlinear,and the lateral constraint of geogrids for backfill can cause a redistribution of foundation pressure.The curve of soil pressure is outside convex at each step initially,and it is close to the distribution for the case of vertical wall subsequently.The variation trend of geogrid tensions at different heights is obtained.Moreover,the failure mechanism and development mode of potential slip surface in retaining wall are proposed.
