In this paper, we adopt the modified Morozov secondary electron emission model to investigate the influence of the characteristic of a space-charge-saturated sheath near the insulated wall of the Hall thruster on the near-wall conductivity, by the method of two-dimensional （2D） particle simulation （2Dq-3V）. The results show that due to the sharp increase of collision frequency between the electrons and the wall under the space-charge-saturated sheath, the near-wall transport current under this sheath is remarkably higher than that under a classical sheath, and equals the near-wall transport current under a spatially oscillating sheath in order of magnitude. However, the transport currents under a space-charge-saturated sheath and a spatially oscillating sheath are different in mechanism, causing different current density distributions under the above two sheaths, and a great influence of channel width on the near-wall transport current under a space-charge-saturated sheath.
Electron-wall interaction is always recognized as an important physical problem because of its remarkable influences on thruster discharge and performance. Based on existing theories, an electrode is predicted to weaken electron-wall interaction due to its low secondary electron emission characteristic. In this paper, the electron-wall interaction in an Aton-type Hall thruster with low-emissive electrodes placed near the exit of discharge channel is studied by a fully kinetic particle-in cell method. The results show that the electron-wall interaction in the region of segmented electrode is indeed weakened, but it is significantly enhanced in the remaining region of discharge channel. It is mainly caused by electrode conductive property which makes equipotential lines convex toward channel exit and even parallel to wall surface in near-wall re- gion; this convex equipotential configuration results in significant physical effects such as repelling electrons, which causes the electrons to move toward the channel center, and the electrons emitted from electrodes to be remarkably accelerated, thereby increasing electron temperature in the discharge channel, etc. Furthermore, the results also indicate that the discharge current in the segmented electrode case is larger than in the non-segmented electrode case, which is qualitatively in accordance with previous experimental results.
Interaction between high-intensity pulsed ion beam （HIPIB） and a double-layer target with titanium film on top of aluminum substrate was simulated. The two-dimensional nonlinear thermal conduction equations, with the deposited energy in the target taken as source term, were derived and solved by finite differential method. As a result, the two-dimensional spatial and temporal evolution profiles of temperature were obtained for a titanium/aluminum double-layer target irradiated by a pulse of HIPIB. The effects of ion beam current density on the phase state of the target materials near the film and substrate interface were analyzed. Both titanium and aluminum were melted near the interface after a shot when the ion beam current density fell in the range of 100 A/cm2 to 200 A/cm2.
