Lines are induced on the surface of a photosensitive （FOTURAN） glass by focused femtosecond laser transverse writing with scanning velocity in a wide range of 40-1800 μm/s. The formed lines are analyzed using scanning electron microscope （SEM） and optical microscope （OM）. It is observed that three distinct morphologies of lines are produced depending on the scanning velocity. Lines written in low velocity level （40 - 100 μm/s） and high velocity level （1000 - 1800 μm/s） are uniform and regular, while those written in moderate velocity level （150 - 600 μm/s） are rough. The influence of scanning velocity is explained based on different pulses overlapping or cumulative dose of laser exposure in irradiated area. Fabrication of shallow groove on the surface is also demonstrated.
