A new technique of designing a dual-band frequency selective surface with large band separation is presented.This technique is based on a delicately designed topology of L-and Ku-band microwave filters.The two band-pass responses are generated by a capacitively-loaded square-loop frequency selective surface and an aperture-coupled frequency selective surface,respectively.A Faraday cage is located between the two frequency selective surface structures to eliminate undesired couplings.Based on this technique,a dual-band frequency selective surface with large band separation is designed,which possesses large band separation,high selectivity,and stable performance under various incident angles and different polarizations.
This paper reports the design of a multiband metamaterial (MM) absorber in the terahertz region.Theoretical and simulated results show that the absorber has four distinct and strong absorption points at 1.69,2.76,3.41 and 5.06 THz,which are consistent with 'fingerprints' of some explosive materials.The retrieved material parameters show that the impedance of MM could be tuned to match approximately the impedance of the free space to minimise the reflectance at absorption frequencies and large power loss exists at absorption frequencies.The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector:the wave is first trapped and reinforced in certain specific locations and then consumed.This multiband absorber has applications in the detection of explosives and materials characterisation.
Based on the substrate integrated waveguide technology,we present a dual-band frequency selective surface(FSS) with a quasi-elliptic bandpass response.The characteristics of the quasi-elliptic bandpass response are realized by shunting two substrate integrated waveguide cavities of different sizes,with the same slots on both sides of the metal surfaces.Four cavities of different sizes and two slots of different sizes are used to design the novel FSS.Every bandpass response with sharp sidebands is induced by two transmission nulls that are generated by the coupling between the slot aperture resonance and the cavity resonance.The simulation results show that such dual-band FSS has the advantages of high selectivity and stable performance at different oblique incident angles.Moreover,it is easy to fabricate.
This paper reports the design of a metamaterial absorber with direction-selective and polarisation-insensitive property.Both theoretical and simulated results reveal that the absorber has a distinct absorption point with direction selectivity at 7.48 GHz,which is related to the resonance of the metamaterial and is not influenced by the polarisation.The retrieved impedance indicates that the impedance of the absorber can be tuned to approximatively match the impedance of the free space on one side and not to match the impedance of the free space on the other side.This design can result in the minimal reflectance,the minimal transmission and the highest absorbance at the absorption frequency.The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector:the wave is first trapped and reinforced in certain specific locations,and then mostly consumed.The distribution of the surface current is consistent with the design,the retrieved impedance and the distribution of the power loss.This absorber may have applications in many scientific and technological areas.
