This paper mainly focuses on the influence of three kinds of media： air, air-10%PA （Nylon） and air-10% POM （polyoxymethylene） on low-voltage circuit breaker arcs. A threedimensional （3-D） model of arc motioa under the effect of external magnetic field is built based on magnetohydrodynamics （MHD） equations. By adopting the commercial computational fluid dynamics （CFD） package based on the control-volume method, the above MHD equations are solved. For the media of air-10%PA and air-10%POM, the distributions of stationary temperature and electrical potential and the transient motion processes are compared with those of air arc. The research shows that both air-10%PA and air -10% POM can cool the arc plasma and the former is more effective. Both of them can increase the stationary voltage as well. Moreover, the presence of the two mixtures can accelerate the arc motion toward the quenching area and ensures the arc quenched in time.
The dynamic process of arc pressure and corresponding arc column expansion, which is the main feature after arc ignition and has a significant effect on the breaking behaviour of low -voltage circuit breakers, is studied. By constructing a three dimensional mathematical model of air arc plasma and adopting the Control Volume Method, the parameters of arc plasma including temperature and pressure are obtained. The variations of pressure field and temperature field with time are simulated. The result indicates that there are six stages for the process of arc column expansion according to the variation of pressure in arc chamber. In the first stage, the maximal pressure locates in the region close to cathode, and in the second stage the maximal pressure shifts to the region close to the anode. In the third stage, the pressure difference between the middle of arc column and the ambient gas is very large, so the arc column begins to expand apparently. In the fourth stage, the pressure wave propagates towards both ends and the maximal pressure appears at the two ends when the pressure wave reaches both sidewalls. In the fifth stage, the pressure wave is reflected and collides in the middle of the arc chamber. In the last stage, the propagation and reflection of pressure wave will repeat several times until a steady burning state is reached. In addition, the experimental results of arc column expansion, corresponding to the arc pressure variation, are presented to verify the simulation results.
This paper focuses on the simulation of the low-voltage arc with an opening contact. A controllable experiment setup with a rotating contact is designed to investigate the arc behaviour. Supported by the experiment, the phenomena of arc elongation and commutation in the case of rotating contact are simulated with the dynamic grid technique introduced. Under the given condition of the external magnetic field and the contact rotating velocity, the stagnation and rapid jump of two arc roots are observed by the calculated and experimental arc root displacement. The voltage of arc column can be divided into four phases and its sharp rising progress comes from the increase of the displacement difference between two arc roots in x direction.
Based on a two-dimensional axisymmetric magneto-hydrodynamic （MHD） model, low current vacuum arc （LCVA） characteristics are studied. The influence of cathode process under different axial magnetic fields and different anode radii on LCVA characteristics is also simulated. The results show that the influence of both cathode process and anode radii on LCVA is significant. The sign of anode sheath potentials can change from negative to positive with the decrease of anode radii. The simulation results are in part verified by experimental results. Especially, as the effect of ion kinetic energy is considered, ion temperature is improved significantly; which is in agreement with experimental results.
