Bubble-bubble interaction is an important factor in cavitation bubble dynamics. In this paper, the dynamic behaviors of double cavitation bubbles driven by varying pressure field downstream of an orifice plate in hydrodynamic cavitation reactor are examined. The bubble-bubble interaction between two bubbles with different radii is considered. We have shown the different dynamic behaviors between double cavitation bubbles and a single bubble by solving two coupling nonlinear equations using the Runge-Kutta fourth order method with adaptive step size control. The simulation results indicate that, when considering the role of the neighbor smaller bubble, the oscil-lation of the bigger bubble gradually exhibits a lag in comparison with the single-bubble case, and the extent of the lag becomes much more obvious as time goes by. This phenomenon is more easily observed with the increase of the initial radius of the smaller bubble. In comparison with the single-bubble case, the oscillation of the bigger bubble is enhanced by the neighbor smaller bubble. Especially, the pressure pulse of the bigger bubble rises intensely when the sizes of two bubbles approach, and a series of peak values for different initial radii are acquired when the initial radius ratio of two bubbles is in the range of 0.9～1.0. Although the increase of the center distance between two bubbles can weaken the mutual interaction, it has no significant influence on the enhancement trend. On the one hand, the interaction between two bubbles with different radii can suppress the growth of the smaller bubble; on the other hand, it also can enhance the growth of the bigger one at the same time. The significant en-hancement effect due to the interaction of multi-bubbles should be paid more attention because it can be used to reinforce the cavitation intensity for various potential applications in future.
The growth and collapse behaviors of a single cavitation bubble near a heated wall and its effect on the heat transfer are numerically investigated. The present study is designed to reveal the mechanism of cavitation enhanced heat transfer from a microscopic perspective. In the simulation, the time-dependent Navier-Stokes equations are solved in an axisymmetric two-dimensional domain. The volume of fluid (VOF) method is employed to track the liquid-gas interface. It is assumed that the gas inside the bubble is compressible vapor, and the surrounding liquid is incompressible water. Mass transfer between two phases is ignored. The calculated bubble profiles were compared to the available experimental data, and a good agreement was obtained. Then, the relationship among bubble motion, flow field and surface heat transfer coefficient was analyzed. On this basis, the effects of such factors as the initial distance between the bubble and the wall, the initial vapor pressure and the initial bubble nucleus size on the heat transfer enhancement are discussed. The present study is helpful to understand the heat transfer phenomenon in presence of cavitation bubble in liquid.
With water as working medium,a numerical study on liquid convection heat transfer accompanied by cavitating flow in a circular tube was conducted by combining mixture model and Schnerr–Sauer cavitation mode in the commercial code,Ansys Fluent.Cavitation is instigated by setting a restriction orifice in the circular tube.The simulation results show that cavitation occurs around the wall of the restriction orifice and disappears at the downstream regions.The comparison of local heat transfer coefficients under the same mass flow rate indicates that,heat transfer is significantly augmented at the downstream regions of the restriction orifice because of the occurrence of cavitation.The analysis on the characteristics of cavitating and noncavitating flows confirms that the occurrence of cavitation can increase the turbulence intensity under the same mass flow rate,which is the origin for heat transfer to be enhanced.Based on it,the effects of such factors as inlet pressure and ratio of orifice to pipe diameter on cavitation enhanced heat transfer were further investigated for the purpose of application.
