Plasma electrolytic oxidation （PEO） coatings are prepared on aluminium with graphite powders added into the electrolyte. The scanning electron microscopy （SEM） coupled with an energy dispersive x-ray analysis system （EDX） is used to characterize the surface and the cross-section morphologies of the coatings. The electrochemical impedance spectroscopy （EIS） is used not only to evaluate the corrosion resistance but also to analyse the structure of the coating. Results show that graphite powders are embedded in the PEO coating. The corrosion resistances of both the inner barrier and the outer porous layer are greatly improved, and the EIS could give some valuable detailed information about the coating structure.
Polytetrafluoroethylene films are treated by room temperature helium atmospheric pressure plasma plumes, which are generated with a home-made single liquid electrode plasma device. After plasma treatment, the water contact angle of polytetrafiuoroethylene fihn drops from 114° to 46° and the surface free energy increases from 22.0 mJ/m2 to 59.1 mJ/m2. The optical emission spectrum indicates that there are reactive species such as O2＋, O and He in the plasma plume. After plasma treatment, a highly crosslinking structure is formed on the fihn surface and the oxygen element is incorporated into the film surface in the forms of C O-C-, -C=O, and O C=O groups. Over a period of 10 days, the contact angle of the treated film is recovered by only about 10°, which indicates that the plasma surface modification is stable with time.
Ti-Al-N hard films have been prepared by cathodic arc deposition by using an unipolar pulsed bias.In the present study,Ti-Al-N films were deposited on stainless steel and silicon wafers.The deposition rate,micrograph,preferred orientation and composition were systematically investigated by usingx-ray diffraction（XRD）,energy dispersive X-ray spectroscopy（EDX）, and a scanning electron microscope（SEM）.It is shown that substate bias duty cycle and frequency have a great effect on film structure.A simple explanation for the results is also presented.
