Introduction Accuracy is a vital performance index for parallel ma-nipulators which is influenced by several factors, in-cluding errors in the drive cell, assembly errors, manufacturing errors, and the structural design. The large number of components in parallel
索网机构是一种柔性的、并联的运动机构阵列,其运动复杂,耦合性强,需要进行机构分析。基于无向图对索网机构进行理论建模,利用邻接表在计算机中进行表示。将索简化为线性弹簧-直线副机构,基于力密度法建立索网机构中活动节点的平衡方程,并推广到整个索网机构。讨论平衡方程的求解方法,建立索网机构中驱动点位置与活动节点位置间对应关系的迭代公式,最后得出一种索网机构的位置分析方法。作为位置解耦算法,对500m口径球面射电望远镜(Five-hundred-meter aperture spherical radio telescope,FAST)的30m模型编程进行索网机构建模与分析。计算结果与用Adams软件仿真结果一致,验证了这种索网机构的位置分析方法。该方法可用于FAST主动反射面面形控制算法,也可用于其他大型索网天线及空间展开天线面形的精调和控制。
Inertia match of the parallel manipulator means the ratio of the inertial load of the parallel manipulator converted to each actuator shaft and the moment of inertia of the actuator is kept within a reasonable range. Currently there are many studies on parallel manipulators, but few mention inertia parameters and inertia match of parallel manipulators. This paper focuses on the inertia characteristics of the 3-RRR reconfigurable planar parallel manipulator. On the basis of the inverse dynamic formulations deduced with the principle of virtual work, the inertia matrix of the 3-RRR planar parallel manipulator in the actuator space is obtained in algebraic form. Then, by unifying the dimension and averaging diagonal elements of the inertia matrix, the equivalent inertia of the parallel manipulator, which is the inertial load of the parallel manipulator converted to each actuator shaft, is determined. By transforming the inertia problem of the 3-RRR parallel manipulator into that of the serial multi-bar manipulator, the practicality of the equivalent inertia deduced by inverse dynamics is demonstrated. According to the physical meaning of the inertia equation, the manipulator is divided in to three parts. Further analysis is carried out on the contribution of each part to the equivalent inertia and their distributions in the required workspace, revealing that the passive links cannot ignored in calculating the equivalent inertia of the parallel manipulator. Finally, the inertia match for the 3-RRR reconfigurable parallel manipulator under three configurations is accomplished, and reducers are selected. The equivalent inertia calculation and the inertial match results illustrate that the inertia math is a necessary step to the design of the parallel manipulator, and inertia parameters dramatically affect dynamic performances of parallel manipulators. Besides, the equivalent inertia and inertial match principles, proposed in the paper, can be widely applied in the dynamic analysis and servomotors selecting for the para
