In order to study the reliability of the empirical estimation of joint shear strength by the JRC(joint roughness coefficient)-JCS(joint compressive strength) model,natural rock joints of dif-ferent lithologic characteristics and different sizes were selected as samples,and their shear strengths under dry and saturated conditions were measured by direct shear test and compared to those esti-mated by the JRC-JCS model.Comparison results show that for natural rock joints with joint surfaces closely matched,the average relative error of joint shear strength between empirical estimation and direct shear test is 9.9%;the reliability of the empirical estimation of joint shear strength by the JRC-JCS model is good under both dry and saturated conditions if the JRC is determined accounting for directional statistical measurements,scale effect and surface smoothing during shearing.However,for natural rock joints with joint surfaces mismatched,the average relative error of joint shear strength between empirical estimation and direct shear test is 39.9%;the reliability of empirical estimation of joint shear strength by the JRC-JCS model is questionable under both dry and saturated conditions.
Joint roughness coefficient(JRC) is the key parameter for the empirical estimation of joint shear strength by using the JRC-JCS(joint wall compressive strength) model.Because JRC has such characteristics as nonuniformity,anisotropy,and unhomogeneity,directional statistical measurement of JRC is the precondition for ensuring the reliability of the empirical estimation method.However,the directional statistical measurement of JRC is time-consuming.In order to present an ideal measurement method of JRC,new profilographs and roughness rulers were developed according to the properties of rock joint undulating shape based on the review of measurement methods of JRC.Operation methods of the profilographs and roughness rulers were also introduced.A case study shows that the instruments and operation methods produce an effective means for the statistical measurement of JRC.
