您的位置: 专家智库 > >

国家自然科学基金(50578008)

作品数:7 被引量:67H指数:5
相关作者:白冰刘大鹏更多>>
相关机构:北京交通大学北京交通管理干部学院华中科技大学更多>>
发文基金:国家自然科学基金更多>>
相关领域:建筑科学理学更多>>

文献类型

  • 7篇中文期刊文章

领域

  • 5篇建筑科学
  • 5篇理学

主题

  • 3篇荷载
  • 3篇荷载作用
  • 2篇多孔介质
  • 2篇数值积分
  • 2篇水分迁移
  • 2篇温度
  • 2篇温度荷载
  • 2篇温度荷载作用
  • 2篇积分
  • 2篇饱和多孔介质
  • 1篇循环温度
  • 1篇土力学
  • 1篇土体
  • 1篇热固结
  • 1篇热力学
  • 1篇吸力
  • 1篇固结
  • 1篇非饱和
  • 1篇非饱和土
  • 1篇非饱和土体

机构

  • 5篇北京交通大学
  • 1篇华中科技大学
  • 1篇北京交通管理...

作者

  • 5篇白冰
  • 2篇刘大鹏

传媒

  • 2篇岩土力学
  • 1篇岩石力学与工...
  • 1篇应用数学和力...
  • 1篇工程力学
  • 1篇Acta M...
  • 1篇Applie...

年份

  • 1篇2007
  • 6篇2006
7 条 记 录,以下是 1-7
排序方式:
Response of saturated porous media subjected to local thermal loading on the surface of semi-infinite space被引量:5
2006年
Heat source function method is adopted in the present paper to derive elementary solutions of coupled thermo-hydro-mechanical consolidation for saturated porous media under conjunct actions of instantaneous point heat source, instantaneous point fluid source and constant volume force. By using the so-called fictitious heat source method and images method, the solutions of a semi-infinite saturated porous medium subjected to a local heat source with time-varied intensity on its free surface are developed from elementary solutions. The numerical integral methods for calculating the unsteady temperature, pore pressure and displacement fields are given. The thermomechanical response are analyzed for the case of a circular planar heat source. Besides, the thermal consolidation characteristics of a saturated porous medium subjected to a harmonic thermal loading are also given, and the fluctuation processes of the field variables located below the center of heat source are analyzed.
Bing Bai
循环温度荷载作用下饱和多孔介质热-水-力耦合响应被引量:17
2007年
对半无限体表面作用简谐循环温度荷载下,饱和多孔介质热-水-力耦合响应的一维情形进行研究,给出内部温度、孔压和位移等的解析表达式。分析了半无限体温度响应由瞬态到准稳态的演化过程以及准稳态条件下温度、孔压和位移等的波动特征。研究表明:随着温度荷载作用时间的增长,热力学响应以波的形式向深处传导和扩散并趋于准稳态过程;随着介质深度的增加,热力学响应的波动幅值不断减小,而其相位相应滞后;随着介质透水性质的增强,孔压沿深度的分布趋于均匀化;当介质深度超过一个波长后,其热力学响应值几乎为零。
白冰
关键词:饱和多孔介质
THERMAL CONSOLIDATION OF LAYERED POROUS HALF-SPACE TO VARIABLE THERMAL LOADING
2006年
An analytical method was derived for the thermal consolidation of layered, saturated porous half-space to variable thermal loading with time. In the coupled governing equations of linear thermoelastic media, the influences of thermo-osmosis effect and thermal filtration effect were introduced. Solutions in Laplace transform space were first obtained and then numerically inverted. The responses of a double-layered porous space subjected to exponential decaying thermal loading were studied. The influences of the differences between the properties of the two layers (e.g., the coefficient of thermal consolidation, elastic modulus) on thermal consolidation were discussed. The studies show that the coupling effects of displacement and stress fields on temperature field can be completely neglected, however, the the thermal responses. effect has an obvious influence on
白冰
变温度荷载作用下半无限成层饱和介质的热固结分析被引量:20
2006年
对半无限成层饱和多孔介质作用随时间变化的温度荷载的热固结问题进行解析求解.其中,热_水_力耦合线性弹性控制方程考虑了热渗效应和等温热流效应的影响.先采用Laplace变换求其在变换域上的解,然后用数值方法求逆变换.对半无限体表面作用呈指数衰减热荷载的双层体系进行研究,分析了两层介质热固结系数、弹性模量等的差异性对热固结特征的影响.研究表明:位移场和应力场对温度场的耦合作用可以忽略,而热渗效应对温度和孔压有显著影响.
白冰
关键词:温度荷载半无限体数值积分
变热源强度温度荷载作用下非饱和土中的水分迁移规律研究被引量:6
2006年
给出非饱和土中热能传输和水分迁移的耦合控制微分方程。假定无限介质内热源的存在引起周围多孔介质内温度的瞬态变化和水分的迁移和扩散。利用多重Fourier变换、Laplace变换给出其在变换域上的解,然后利用热源函数法给出瞬时点热源条件下非稳态温度场、体积含水率分布场的解析求解方法。通过在时间域上和空间域上进行积分,建立热源强度随时间变化的球域热源情况下的数值积分求解方法,给出温度场作用下多孔介质内水分迁移的演化规律和分布特征。
白冰刘大鹏
关键词:土力学非饱和土体水分迁移数值积分
饱和多孔介质热-水-力控制方程耦合项的意义及耦合影响分析被引量:14
2006年
基于饱和多孔介质完全耦合条件下热-水-力控制方程的一般形式,对各耦合项的物理意义进行了分析。以等温条件下水-力耦合的Biot渗透固结理论和等压条件下热-力耦合的热弹性理论两种退化形式为基础,给出耦合系数的物理意义及其函数表达式。研究表明,其中一些耦合系数实际上有相同的物理意义和数学形式,因而可使控制方程得到简化。针对不同的介质特性以及热、水、力条件,给出几种特定情形下控制方程的简化形式。以无限大多孔介质中球域热源的热力学响应分析为例,对一些耦合项的影响程度进行了比较研究。
白冰
关键词:饱和多孔介质热力学
非饱和介质中热能传输及水分迁移的数值积分解被引量:11
2006年
在给出非饱和介质热能-水分传输的耦合质量控制方程和基于Fourier热传导定律的热能平衡方程的基础上,对热能传输及水分迁移的基本特征和机理进行了分析。其中,考虑了温度势、吸力势和重力势的耦合作用影响。给出有热源时控制方程的简化形式,并对半无限体自由表面作用平面热源条件下介质内非稳态温度场、体积含水率分布场进行数值积分求解。利用这些解答给出常热源强度和变热源强度两种情况下,温度场随时间的变化特征以及水分迁移的演化过程,并分析了重力项对计算结果的影响。
白冰刘大鹏
共1页<1>
聚类工具0