您的位置: 专家智库 > >

国家教育部博士点基金(200806100009)

作品数:7 被引量:40H指数:5
相关作者:陈耀强龚茂初郑灵敏黎秀敏李红梅更多>>
相关机构:四川大学成都信息工程大学更多>>
发文基金:国家教育部博士点基金国家自然科学基金国家高技术研究发展计划更多>>
相关领域:理学化学工程一般工业技术环境科学与工程更多>>

文献类型

  • 7篇期刊文章
  • 1篇会议论文

领域

  • 7篇理学
  • 2篇化学工程
  • 2篇一般工业技术
  • 1篇环境科学与工...

主题

  • 2篇三效催化剂
  • 2篇金属
  • 2篇碱土
  • 2篇碱土金属
  • 2篇CE
  • 2篇掺杂
  • 2篇催化
  • 2篇催化剂
  • 1篇氧化还原性
  • 1篇氧化还原性能
  • 1篇还原性
  • 1篇固溶
  • 1篇固溶体
  • 1篇贵金属
  • 1篇ND
  • 1篇ND2O3
  • 1篇NEODYM...
  • 1篇ONLY
  • 1篇PALLAD...
  • 1篇PREPAR...

机构

  • 5篇四川大学
  • 1篇成都信息工程...

作者

  • 5篇陈耀强
  • 4篇龚茂初
  • 1篇彭娜
  • 1篇信欣
  • 1篇赵明
  • 1篇刘建英
  • 1篇祝清超
  • 1篇李红梅
  • 1篇陈山虎
  • 1篇吴冬冬
  • 1篇周菊发
  • 1篇张雪乔
  • 1篇郭家秀
  • 1篇黎秀敏
  • 1篇郑灵敏
  • 1篇刘盛余
  • 1篇李移乐

传媒

  • 2篇无机材料学报
  • 2篇Journa...
  • 1篇高等学校化学...
  • 1篇Chines...
  • 1篇Journa...

年份

  • 2篇2012
  • 2篇2011
  • 2篇2010
  • 2篇2009
7 条 记 录,以下是 1-8
排序方式:
镧、锰共掺杂改性CeO2-ZrO2-Al2O3固溶体的性能被引量:5
2011年
采用共沉淀法制备了一系列La,Mn共掺杂的CeO2-ZrO2-A12O3(CZA)复合氧化物,采用BET,XRD,H2-TPR,XPS和XRF等方法对样品进行表征.结果表明,全部样品均形成了稳定的CZA固溶体,经600℃焙烧后表现出良好的织构性能,1000℃老化后,La,Mn共掺杂样品具有最佳的高温稳定性;H2-TPR测试表明,La,Mn之间存在正协同效应,共掺杂的样品具有最佳的低温还原性能和高温稳定性;XPS结果表明,掺杂La可有效抑制在焙烧过程中Mn向表面的迁移,从而保持较高的表面吸附氧浓度.
张雪乔信欣刘建英刘盛余赵明陈耀强
关键词:MNOX
不同碱土金属搀杂对Pt-Rh/CeZrM/La-Al2O3三效催化剂性能的影响
采用共沉淀法制备了不同碱土金属掺杂的CeZrMO(M=Mg,Ca,Sr,Ba)固溶体。将所制备的CeZrM和La-AlO材料用于低贵金属Pt-Rh型三效催化剂的制备,并对催化剂进行了活性评价。催化活性测试结果表明,所有新...
吴冬冬郭家秀李移乐龚茂初陈耀强
关键词:三效催化剂碱土金属储氧材料
文献传递
Preparation of activated carbons and their adsorption properties for greenhouse gases:CH_4 and CO_2被引量:9
2011年
Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ?C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.
Hao Yang Maochu Gong Yaoqiang Chen
关键词:CH4CO2
掺杂钇铋Ce-Zr-Al储氧材料的制备及性能研究被引量:8
2010年
采用共沉淀法制备了掺杂Y3+、Bi3+的CeO2-ZrO2-Al2O3(CZA)储氧材料,并通过XRD、低温N2吸附-脱附、氧脉冲吸附(OSC)及H2-TPR等手段进行了表征.XRD结果表明,600℃和1000℃焙烧后,Y3+、Bi3+的加入没有改变物相结构,所有样品均形成单一立方相萤石结构固溶体.低温N2吸附结果表明,Y3+掺杂的Ce0.6Zr0.3Y0.1O1.95-Al2O3(CZYA)材料,其织构性能及热稳定性都有很大的改善,1000℃老化5h后,比表面积和孔容可分别达80.75m2/g和0.22mL/g.OSC和H2-TPR结果表明,同时掺杂Y3+、Bi3+的Ce0.6Zr0.2Y0.1Bi0.1O1.9-Al2O3(CZYBA)材料,其储氧性能明显增强,经600和1000℃焙烧后分别达到461和242μmol/g;同时掺杂Y3+、Bi3+增强了CZA材料的还原性能,1000℃老化5h后还原峰温度从546℃降低到429℃.
祝清超黎秀敏李红梅郑灵敏陈耀强龚茂初
关键词:BI2O3
掺杂不同量Nd_2O_3对CeO_2-ZrO_2-Al_2O_3材料性能的影响被引量:2
2012年
采用共沉淀法制备了一系列Nd2O3含量为0~13wt%的CeO2-ZrO2-A12O3(CZA)复合氧化物,并通过X射线衍射(XRD)、低温N2吸附–脱附、氧脉冲吸附(OSC)、H2–程序升温还原(H2-TPR)及扫描电子显微镜(SEM)等方法对所制备的材料进行了表征.研究结果表明,Nd2O3在CZA固溶体中的溶解限约为10wt%,过量Nd的添加会出现分相形成Nd0.5Ce0.5O1.75氧化物.掺杂适量Nd能有效抑制氧化物晶粒的长大,提高材料的热稳定性和氧化还原性能.Nd2O3的掺杂量为10wt%时,样品的织构稳定性最好,1000℃老化5 h后,比表面积和孔容分别达97.14 m2/g和0.44 mL/g.Nd2O3的掺杂量为7wt%时,样品有高的储氧量,经600℃和1000℃焙烧后储氧量分别为938.01μmol/g和821.72μmol/g;体相氧的移动能力最强,还原性能最佳,老化后还原峰温由465℃升高到483℃.SEM结果表明,所制备的材料均为球形颗粒,Nd2O3的添加可以有效阻止高温焙烧过程中粒子的团聚.
彭娜陈山虎周菊发陈耀强龚茂初
关键词:氧化还原性能
不同碱土金属掺杂对Rh/Ce_(0.35)Zr_(0.55)M_(0.10)O_(1.90)+Pt/La-Al_2O_3三效催化剂性能的影响被引量:7
2010年
采用共沉淀法制备了不同碱土金属掺杂的Ce0.35Zr0.55M0.10O1.90(CZM;M=Mg,Ca,Sr或Ba)固溶体,并采用N2吸附-脱附、储氧量测定、程序升温还原和X射线衍射对其进行了表征.以CZM和La-Al2O3为载体,制备了负载型低贵金属Pt-Rh三效催化剂,并考察了其催化活性.结果表明,经600oC焙烧5h后,CZCa样品的比表面积为109m2/g,经1000oC老化5h后仍有47m2/g.所有新鲜样品均具有较低的还原温度和良好的还原性能.老化后的CZCa仍具有较好的还原性能和较高的储氧量.在600oC下焙烧的样品均为立方晶相;经1000oC老化5h后,只有CZMg发生相分离,其余样品仍为稳定的立方晶相.活性测试结果表明,所有新鲜催化剂均具有良好的低温起燃性能;经1000oC水热老化5h后,含有CZCa的催化剂仍具有较低的起燃温度,表现出优异的抗老化性能.
吴冬冬郭家秀李移乐龚茂初陈耀强
关键词:三效催化剂碱土金属
Synthesis of neodymium modified CeO_2-ZrO_2-Al_2O_3 support materials and their application in Pd-only three-way catalysts被引量:4
2012年
Ce-Zr-Al-Nd2O3 (CZAN) support materials were prepared by co-precipitation and impregnation methods, respectively. They were characterized by X-ray diffTaction (XRD), low temperature nitrogen adsorption-desorption, oxygen pulsing technique, H2-temperamre programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS). The Pd-only three-way catalysts (Pd-TWC) supported on these materials were prepared by incipient wetness method and studied by activity tests. The results demonstrated that the CZAN supports obtained by the two methods showed better structural, textural and redox properties than the CZA without Nd2O3, and the addition of Nd203 improved the catalytic activity of TWC. Especially, the CZAN-i support prepared by impregnation method had better thermal stability and redox property. Meanwhile, the Pd/CZAN-i catalyst exhibited the best catalytic performance. XPS measurements indicated that the Nd-modified samples possessed more Ce3+ and oxygen vacancies on the surface of samples, which led to a better redox property. The excellent redox property of support materials helped to improve the catalytic activity of TWC.
彭娜周菊发陈山虎罗秀超陈耀强龚茂初
关键词:ND2O3
Catalytic methanol decomposition to carbon monoxide and hydrogen over Pd/CeO_2-ZrO_2-La_2O_3 with different Ce/Zr molar ratios被引量:6
2009年
Hairong Wang, Yaoqiang Chen, Qiulin Zhang, Qingchao Zhu, Maochu Gong, Ming Zhao( Key Laboratory of Green Chemistry & Technology of Ministry Education, College of Chemistry, Sichuan University, Chengdu 610064, Sichuan, China
Hairong Wang Yaoqiang Chen Qiulin Zhang Qingchao Zhu Maochu Gong Ming Zhao
关键词:PALLADIUMXPSHYDROGEN
共1页<1>
聚类工具0