The molten liquid flow inside a packed bed is a familiar momentum transportation phenomenon in a blast furnace.With regard to the reported mathematical models describing the liquid flow within a packed bed,there are some obstacles for their application in engineering design,or some limitations in the model itself.To overcome these problems,the forces from the packed bed to the liquid flow were divided into appropriate body and surface forces on the basis of three assumptions.Consequently,a new mathematical model was built to present the liquid flow inside the coke bed in a blast furnace.The mathematical model can predict the distribution of liquid flowrate and the liquid flowing range inside the packed bed at any time.The predicted results of this model accord well with the experimental data.The model will be applied considerably better in the simulation on the ironmaking process compared with the existent models.
The molten liquid discrete flow inside a packed bed is a typical transport phenomenon in the blast furnace.As for the reported mathematical models presenting the liquid discrete flow within the packed bed,there are some barriers for their application to an engineering scale-up,or some imperfections in model descriptions.To overcome these deficiencies,the effects of the packed bed on the liquid discrete flow have been divided into resistance action and dispersal action,and appropriate descriptions have been given for the two actions,respectively.Consequently,a new mathematical model has been built to present the liquid discrete flow inside a coke bed in the blast furnace.The mathematical model can predict the distribution of liquid flux and the liquid flowing range inside the packed bed at any time.The prediction of this model accords well with the experimental data.The model will be much better for the simulation of the ironmaking process,compared with the existent model.
WANG Cheng-shanMU Xiao-jingZHENG Shao-boJIANG Guo-changXIAO Xing-guo
