Lattice modular robots possess diversity actuation methods, such as electric telescopic rod, gear rack, magnet, robot arm, etc. The researches on lattice modular robots mainly focus on their hardware descriptions and reconfiguration algorithms. Meanwhile, their design architectures and actuation methods perform slow telescopic and moving speeds, relative low actuation force verse weight ratio, and without internal space to carry objects. To improve the mechanical performance and reveal the locomotion and reconfiguration binary essences of the lattice modular robots, a novel cube-shaped, frame-like, pneumatic-based reconfigurable robot module called pneumatic expandable cube（PE-Cube） is proposed. The three-dimensional（3D） expanding construction and omni-directional rolling analysis of the constructed robots are the main focuses. The PE-Cube with three degrees of freedom（Do Fs） is assembled by replacing the twelve edges of a cube with pneumatic cylinders. The proposed symmetric construction condition makes the constructed robots possess the same properties in each supporting state, and a binary control strategy cooperated with binary actuator（pneumatic cylinder） is directly adopted to control the PE-Cube. Taking an eight PE-Cube modules＇ construction as example, its dynamic rolling simulation, static rolling condition, and turning gait are illustrated and discussed. To testify telescopic synchronization, respond speed, locomotion feasibility, and repeatability and reliability of hardware system, an experimental pneumatic-based robotic system is built and the rolling and turning experiments of the eight PE-Cube modules＇ construction are carried out. As an extension, the locomotion feasibility of a thirty-two PE-Cube modules＇ construction is analyzed and proved, including dynamic rolling simulation, static rolling condition, and dynamic analysis in free tipping process. The proposed PE-Cube module, construction method, and locomotion analysis enrich the family of the lattice modular robot and pr
Most current biped robots are equipped with two feet arranged in the right and left which inspired by the human body system. Different from the existing configurations, a novel biped robot with inner and outer feet based on a spatial six-bar 4R2C（R and C denote revolute and cylindric joints, respectively） mechanism is proposed. It can move along a line or a curve by three walking modes that are dwell adjustment mode, limit position adjustment mode and any position adjustment mode. Kinematic, gait planning and stability analyses are performed respectively, and a prototype is developed. Lastly, a potential application is considered and two manipulating modes（sphere and cylinder manipulating modes） are carried out. This interesting mechanism feathering its single dosed-chain structure and unique work performance is expected to motivate the configuration creation of biped robots.
