During the grinding of optical glass, the abrasion directly affects the morphology and depth of subsurface cracks(SSC). The effect of dynamic impact of grinding abrasives on optical glass is an important issue in the field of optics manufacturing. In this work, a single diamond scratch was used to grind optical glass, and grinding parameters were collaboratively controlled to ensure that the cutting layer remained constant. A dynamometer was used to record the duration of the impact process, and the cross-section of the test piece was polished for scanning electron microscopy(SEM) to determine the depth of the SSCs. The experimental results show that as wheel speed increases, SSC depth tends to decrease. When the wheel speed gradually increases from 500 r/min to 2500 r/min, the probability distribution curve for the maximum SSC depth shifts downward by around 80 μm. The effect of the dynamic impact of single diamond scratch is found to be an important cause of SSC formation in optical glass during grinding, i.e., the faster the grinding, the shallower the SSCs.
The elastic-plastic transition regime and brittle-ductile transition regime in scratch process for optical glass BK7 were analyzed based on the Hertzian equation and the stress ratio theory which was proposed by Wei. The interacting scratch process for optical glass BK7 with the grit interval distance as the variable was simulated by the ABAQUS software of finite element simulation based on the energy fracture theory. Double grits interacting scratch test for optical glass BK7 was carried out on the DMG ULTRASONIC 70-5 linear, by which the reliability of finite element simulation was verified. The surface morphology of the workpiece was analyzed by scanning electron microscopy（SEM）, which showed that the width of groove increased obviously with the increase of scratch depth and the grit interval distance. Results of the width of groove were consistent with the simulation results. The subsurface damage layer was analyzed by the method of HF acid etching, which showed that there was an area of cracks intersecting. The scratching force was measured by the threedimensional dynamometer of KISTLER, which showed that the second scratching force increased with the increase of scratching depth and the grit interval distance. The force in the second scratch was smaller than that in the first time, which was consistent with the Griffith fracture theory.
