This paper put forward a new-type vortex generator enhancing heat exchange of solar air-drier and air-heater on the gas side,and investigated the mechanism of heat transfer enhancement and drag reduction by the influence of vortex generators on the coherent structure of turbulent boundary layer.The flow and heat transfer characteristics of rectangle channel with bevel-cut half-elliptical column vortex generators were obtained using large eddy simulation(LES)and the hydromechanics software FLUENT6.3.The instantaneous properties of velocity,temperature and pressure in channel were gained.The coherent structure of turbulent boundary layer flow was showed,and the characteristic of vortex induced by inclined-cut semi-ellipse vortex generator and its influence on turbulent coherent structure were analyzed.And the effect mechanism of turbulent coherent structure on flow field,pressure field and temperature field was discussed.Based on the results,the heat transfer coefficient and drag reduction of the new vortex generator with different pitch angles were compared.Sometimes,the coherent effects of the increased wall heat transfer and the decreased skin friction do not satisfy the Reynolds analogy.The turbulent coherent structure can be controlled through the geometry of the vortex generator,so the heat transfer and drag reduction can also be controlled.Then we can seek suitable form of vortex generator and structure parameters,in order to achieve the enhanced heat transfer and flow of drag reduction in the solar air-heater and solar air-drier.
WEN Juan,YANG Li,QI Cheng-ying(Department of Thermal Power Engineering,Hebei University of Technology,Tianjin 300401,China)
