Only in the presence of sidelobe jamming(SLJ),can the conventional adaptive monopulse technique null the jamming effectively and maintain the monopulse angle estimation accuracy simultaneously.While mainlobe jamming(MLJ) exists,the mainlobe of adaptive pattern will subject to serious distortion,which results in a failure of detecting and tracking targets by monopulse technique.Therefore,a monopulse angle estimation algorithm based on combining sum-difference beam and auxiliary beam is presented.This algorithm utilizes both high gain difference beams and high gain auxiliary beams for cancelling the mainlobe jammer and multiple sidelobe jammers(SLJs) while keeping an adaptive monopulse ratio.Theoretical analysis and simulation results indicate that the serious invalidation of monopulse technique in MLJ and SLJs scenarios is resolved well,which improves the monopulse angle accuracy greatly.Furthermore,the proposed algorithm is of simple implementation and low computational complexity.
A novel adaptive detection scheme both for pointlike and distributed targets in the presence of Gaussian disturbance in the partially homogeneous environment(PHE) is proposed. The novel detection scheme is based on the orthogonal projection technique. Both the case of known covariance matrix structure and the case of unknown covariance matrix structure are considered. For the former case, the closedform statistical property of the novel detectors is derived. When the covariance matrix is unknown, the corresponding detectors have higher probabilities of detection(PDs) than their natural competitors. Moreover, they ensure constant false alarm rate(CFAR) property.
A new technique for designing a varactor-tunable frequency selective surface (FSS) with an embedded bias network is proposed and experimentally verified. The proposed FSS is based on a square-ring slot FSS. The frequency tuning is achieved by inserting varactor diodes between the square mesh and each unattached square patch. The square mesh is divided into two parts for biasing the varactor diodes. Full-wave numerical simulations show that a wide tuning range can be achieved by changing the capacitances of these loaded varactors. Two homo-type samples using fixed lumped capacitors are fabricated and measured using a standard waveguide measurement setup. Excellent agreement between the measured and simulated results is demonstrated.
