Ridge InGaN multi-quantum-well-structure (MQW) edge-emitting laser diodes (LDs) were grown on (0001) sapphire substrates by low-pressure metal-organic chemical vapour deposition (MOCVD).The dielectric TiO2/SiO2 front and back facet coatings as cavity mirror facets of the LDs have been deposited with electron-beam evaporation method.The reflectivity of the designed front coating is about 50% and that of the back high reflective coating is as high as 99.9%.Under pulsed current injection at room temperature,the influences of the dielectric facets were discussed.The threshold current of the ridge GaN-based LDs was decreased after the deposition of the back high reflective dielectric mirrors and decreased again after the front facets were deposited.Above the threshold,the slope efficiency of the LDs with both reflective facets was larger than those with only back facets and without any reflective facets.It is important to design the reflectivity of the front facets for improving the performance of GaN-based LDs.
Dry deposition in China has not yet been intensively studied even though it constitutes an important pathway for acid deposition. The total deposition was monitored at Tieshanping catchment, a regional remote site in Chongqing City. The dry deposition loads of sulphur, calcium and nitrogen are estimated by using a canopy throughfall approach. The results indicate that the annual dry deposition loads of sulphur and calcium at Tieshanping site are much higher than those measured in forestry areas in other countries, while the dry deposition flux of ni- trogen is at a comparable level. The dry deposition loads of sulphur, calcium and nitrogen are all higher than the wet deposition loads. Applying a canopy budget model has proven that the routine, simplified canopy throughfall approach may underestimate the dry deposition flux of nitrogen-containing species.
The Wutai greenstone belt in central North China Craton(NCC) hosts a number of Precambrian gold deposits and ore occurrences. Based on the host rock association, these can be divided into Banded Iron Formation(BIF), meta-volcano-sedimentary and meta-conglomerate types. The two former types formed during ~2.5-2.3 Ga and the third one at ~1.85 Ga. The characteristics of these Precambrian gold deposits are broadly similar with those of the orogenic gold deposits. Based on available geochronological data, here we reconstruct the major tectonic events and their relationship with gold mineralization in the Wutai-Hengshan-Fuping region during Neoarchean to Paleoproterozoic as follows.(1)~2.6-2.5 Ga: widespread intrusion of tonalite-trondhjemite-granodiorite(TTG) magmas in the Hengshan terrane and Fuping continental arc, formation of the Wutai volcanic arc in the southern margin of Hengshan terrane with granitoids emplacement, and the Hengshan-Wutai intra-oceanic arc accretion to the Fuping arc at the end of Neoarchean.(2) ~ 2.5-2.3 Ga: the subduction of Hengshan arc from north leading to persistent magmatism and orogenic gold mineralization.(3)~2.2-2.1 Ga:extension leading to the formation of graben structure in the Wutai and Fuping region, deposition of the Hutuo and Wanzi Group sediments, formation of placer gold through erosion of the orogenic gold deposits.(4)~2.2-2.0 Ga: widespread magmatism in the Wutai-Hengshan-Fuping region.(5)~1.95-1.8 Ga: regional metamorphism associated with collision of the Western and Eastern Blocks of the NCC and associated orogenic gold deposits. The multiple subduction-accretion-collision history and subsequent deep erosion has significantly affected most of the Precambrian gold deposits in the Wutai greenstone belt.
Ju-Quan ZhangSheng-Rong LiM.SantoshJing LuChun-Liang Wang
Thermodynamic conventions suffer from describing dynamical distinctions,especially when the structural and energetic changes induced by rare events are insignificant.By using the ensemble theory in the trajectory space,we present a statistical approach to address this problem.Rather than spatial particle-particle interaction which dominates thermodynamics,the temporal correlation of events dominates the dynamics.The zeros of dynamic partition function mark phase transitions in the space-time,i.e.,dynamic phase transition(DPT),as Yang and Lee formulate traditional phase transitions,and hence determine dynamic phases on both sides of the zeros.Analogous to the role of temperature(pressure) as thermal(mechanical) potential,we interpret the controlling variable of DPT,i.e., dynamic field,as the dynamical potential.These findings offer possibility towards a unified picture of phase and phase transition.
We develop a new hierarchical dislocation-grain boundary (GB) interaction model to predict the mechanical behavior of polycrystalline metals at micro and submicro scales by coupling 3D Discrete Dislocation Dynamics (DDD) simulation with the Molecular Dynamics (MD) simulation.At the microscales,the DDD simulations are responsible for capturing the evolution of dislocation structures;at the nanoscales,the MD simulations are responsible for obtaining the GB energy and ISF energy which are then transferred hierarchically to the DDD level.In the present model,four kinds of dislocation-GB interactions,i.e.transmission,absorption,re-emission and reflection,are all considered.By this methodology,the compression of a Cu micro-sized bi-crystal pillar is studied.We investigate the characteristic mechanical behavior of the bi-crystal compared with that of the single-crystal.Moreover,the comparison between the present penetrable model of GB and the conventional impenetrable model also shows the accuracy and efficiency of the present model.
On the basis of the current measurements from the moored Long Ranger ADCP in the upper 450 m layer and the deep current measurements at 2000 and 2300 m from the moored cur-rent meters with the time series data of about 7 months at the mooring station in the northeastern South China Sea, the spectral analyses and calculation have been made. The major results are as follows: (ⅰ) From the progressive vector diagrams of the observed daily currents at the water lev-els from 50 m to 400 m, its temporal variation of velocity rotated counterclockwise in most of the observing time. This agrees basically with the result from the qualitative analysis of the sea surface height data, which was obtained from TOPEX/ERS-2 altimeter data by CCAR. The daily and monthly average velocities are both the largest in November, next in October and minimum in Au-gust. (ⅱ) At the 2000 and 2300 m levels, the daily and monthly average velocities are both the largest in January, next in September and minimum in August. From the seasonal change of cur-rents, the current velocity is the strongest in winter (January-March), next in autumn, and weak in summer. (ⅲ) There exists the variation of tidal current with the change of depth. In the upper layer, the height of diurnal peak is higher than that of semidiurnal peak. However, the semidiurnal peak is higher than the diurnal peak at the levels from 200 m to 400 m. In the layers above 450 m the clockwise component is dominant in their fluctuations. In the layers below 1500 m the diurnal peak is again higher than the semidiurnal peak. (ⅳ) There is the prominent periodic fluctuation of more than two months in the layer from 50 m to 2300 m. The period of this prominent peak is 75 d and its fluctuation is counterclockwise in the upper 450 m layers, and is 68 d and 69 d at the depths of 2000 and 2300 m, respectively, and the counterclockwise component is dominant in their fluctua-tions. (ⅴ) There are the variations of periods fluctuating with the change of depth in the upper 450 m layers. For
Nonlinear fastest growing perturbation, which is related to the nonlinear singular vector and nonlinear singular value proposed by the first author recently, is obtained by numerical approach for the two-dimensional quasigeostrophic model in this paper. The difference between the linear and nonlinear fastest growing perturbations is demonstrated. Moreover, local nonlinear fastest growing perturbations are also found numerically. This is one of the essential differences between linear and nonlinear theories, since in former case there is no local fastest growing perturbation. The results show that the nonlinear local fastest growing perturbations play a more important role in the study of the first kind of predictability than the nonlinear global fastest growing perturbation.
