Coupled slow waves, slow acoustic waves, and electromagnetic waves are simultaneously achieved based on a piezoelectric material, in which a line defect is created within a honeycomb lattice array of cylindrical holes etched in a LiNbO_3 slab. Finite element simulations in frequency domain and time domain demonstrate that a highly localized slow mode is obtained in the defect. Owing to the piezoelectricity of LiNbO_3, acoustic and electromagnetic waves are coupled with each other and transmit along the line defect. Therefore, in addition to a slow acoustic wave, an electromagnetic wave with a group velocity even lower than conventional acoustic waves is achieved.
The propagation characteristics of laser-generated like-Rayleigh waves in viscoelastic adhesive coating/substrate structures were studied.Considering the viscoelasticity of the coating and substrate,we have established the finite element models in frequency domain for the laser-generated like-Rayleigh waves in the epoxy coating/aluminum substrate,epoxy coating/brass substrate,and epoxy coating/foam substrate structures,respectively.In addition,we have investigated the waveform and propagation characteristics of the like-Rayleigh waves and studied the influences of the coating transparency,coating thickness,coating viscoelasticity,and substrate viscoelasticity on the propagation characteristics of the like-Rayleigh waves.Moreover,we have verified the results by the theoretical phase velocity and attenuation curves.The results show that the coating viscoelasticity induces the attenuation characteristics of the higher frequencies of the like-Rayleigh waves,but has little effect on the lower frequencies,and the substrate viscoelasticity has the influences on both the higher and lower frequencies of the like-Rayleigh waves,especially the lower frequencies.Furthermore,the mode and dispersive characteristics of the like-Rayleigh waves are closely related to the substrates.This study provides a useful theoretical basis for inverting mechanical parameters and evaluating the adhesive quality of the viscoelastic adhesive coating/substrate structures.
Nonlinear impedances of two thermoacoustic stacks with ordered structures(plate-type and pipe-type) and one with a disordered structure(copper mesh) are studied. The linear resistances, nonlinear coefficients and effective acoustic masses of the stacks are extracted from the experimental results based on an analogical model of nonlinear impedances of porous materials. The resistance and nonlinear coefficient of the disordered stack are found to be much larger than those of the ordered stacks, which have similar volume porosities. In the ordered stacks, the resistance is only marginally influenced by the length of the stack, while in the disordered stack, the resistance increases significantly with the length. These characteristics of the impedances of ordered and disordered stacks are explained with the minor loss theory and the tortuosity of a stack.
Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model.Meanwhile,the effects of friction,the first moment,and moment of inertia induced by mass loads are considered.The predicted resonance frequencies of the ceramic tubes are sensitive to not only the mechanical parameters of the scanners,but also the friction acting on the attached shaking ball and corresponding bending moment on the tubes.The theoretical results are in excellent agreement with the related experimental measurements.This model and corresponding results are applicable for optimizing the structures and performances of the scanners.
