To improve the analysis methods for the measurement of the sediment particle sizes with a wide distribution and of irregular shapes, a sediment particle image measurement, an analysis system, and an extraction algorithm of the optimal threshold based on the gray histogram peak values are proposed. Recording the pixels of the sediment particles by labeling them, the algorithm can effectively separate the sediment particle images from the background images using the equivalent pixel circles with the same diameters to represent the sediment particles. Compared with the laser analyzer for the case of blue plastic sands, the measurement results of the system are shown to be reasonably similar. The errors are mainly due to the small size of the particles and the limitation of the apparatus. The measurement accuracy can be improved by increasing the Charge-Coupled Devices （CCD） camera resolution. The analysis method of the sediment particle images can provide a technical support for the rapid measurement of the sediment particle size and its distribution.
The effect of random waves on vertical plane turbulent jets is studied numerically and the mechanism behind the interaction of the jet and waves is analyzed. The large eddy simulation method is used and the σ-coordinate system is adopted. Turbulence is modeled by a dynamic coherent eddy model. The σ-coordinate transformation is introduced to map the irregular physical domain with a wavy free surface and an uneven bottom onto a regular computational domain. The fractional step method is used to solve the filtered Navier–Stokes equations. Results presented include the distribution of velocity, the decay law of the mean velocity along the jet axis, self-similar characteristics and volume flux per unit width. In particular, the role of coherent structures on the momentum transfer along the jet centerline and the jet instantaneous characteristics in JONSWAP waves are a special focus of this research. The numerical results obtained are of great theoretical importance in understanding the behavior of turbulent jets in random wave environments.
We has developed a novel dynamic coherent eddy model,in which the coherent structure-Q criterion introduced by Hunt et al(1988)-is taken into account in the subgrid-scale turbulent viscosity based on the eddy viscosity model.One proposed method is to combine the resolved-scale velocity-gradient tensor in the classical Smagorinsky model with Q criterion weighted.A kind of dynamic procedure which was averaged in a general process at temporal direction based on the autocorrelations of the characteristic resolved scales of turbulence was taken for the coefficient of subgrid model.The model is implemented in the σ-coordinate and the filtered Navier-Stokes equations are solved by the operator splitting method.The validation was explored to 2-D turbulent slot jet both in ambient environment and in regular waves.The prediction of the present model was compared with the experiment data,including the averaged velocity profiles,the velocity fluctuations and the Reynolds stress.The model performance is shown to be satisfactory.
LU Jun,TANG HongWu,WANG LingLing & PENG Feng College of water conservancy of hydro-power engineering,Hohai University,Nanjing 210098,China
The thermal imaging technique relies on the usage of infrared signal to detect the temperature field.Using temperature as a flow tracer,thermography is used to investigate the scalar transport in the shallow-water wake generated by an emergent circular cylinder.Thermal imaging is demonstrated to be a good quantitative flow visualization technique for studying turbulent mixing phenomena in shallow waters.A key advantage of the thermal imaging method over other scalar measurement techniques,such as the Laser Induced Fluorescence（LIF）and Planar Concentration Analysis（PCA）methods,is that it involves a very simple experimental setup.The dispersion characteristics captured with this technique are found to be similar to past studies with traditional measurement techniques.
When subway tunnels are routed underneath rivers, riverbed scour may expose the structure, with potentially severe consequences. Thus, it is important to identify the maximum scour depth to ensure that the designed buried depth is adequate. There are a range of methods that may be applied to this problem, including the fluvial process analysis method, geological structure analysis method, scour formula method, scour model experiment method, and numerical simulation method. However, the application ranges and forecasting precision of these methods vary considerably. In order to quantitatively analyze the characteristics of the different methods, a subway tunnel passing underneath a river was selected, and the aforementioned five methods were used to forecast the maximum scour depth. The fluvial process analysis method was used to characterize the river regime and evolution trend, which were the baseline for examination of the scour depth of the riverbed. The results obtained from the scour model experiment and the numerical simulation methods are reliable; these two methods are suitable for application to tunnel projects passing underneath rivers. The scour formula method was less accurate than the scour model experiment method; it is suitable for application to lower risk projects such as pipelines. The results of the geological structure analysis had low precision; the method is suitable for use as a secondary method to assist other research methods. To forecast the maximum scour depth of the riverbed above the subway tunnel, a combination of methods is suggested, and the appropriate analysis method should be chosen with respect to the local conditions.
