您的位置: 专家智库 > >

国家自然科学基金(50976053)

作品数:4 被引量:19H指数:3
相关作者:王玮张兴王海东马维刚更多>>
相关机构:北京大学清华大学更多>>
发文基金:国家自然科学基金更多>>
相关领域:理学电子电信一般工业技术更多>>

文献类型

  • 4篇中文期刊文章

领域

  • 2篇理学
  • 1篇电子电信
  • 1篇一般工业技术

主题

  • 2篇金属薄膜
  • 1篇电子-声子耦...
  • 1篇声子
  • 1篇声子耦合
  • 1篇理论和实验研...
  • 1篇脉冲
  • 1篇脉冲激光
  • 1篇激光
  • 1篇激光加热
  • 1篇飞秒
  • 1篇飞秒脉冲
  • 1篇飞秒脉冲激光
  • 1篇PROPER...
  • 1篇SPECIF...
  • 1篇TECHNI...
  • 1篇ELECTR...
  • 1篇METALL...
  • 1篇THERMA...
  • 1篇TRANSI...
  • 1篇INTERR...

机构

  • 2篇北京大学
  • 2篇清华大学

作者

  • 2篇马维刚
  • 2篇王海东
  • 2篇张兴
  • 2篇王玮

传媒

  • 2篇物理学报
  • 2篇Chines...

年份

  • 3篇2011
  • 1篇2010
4 条 记 录,以下是 1-4
排序方式:
飞秒激光热反射系统测量金属薄膜中的热波被引量:9
2010年
金属材料中的热波现象可以利用包含电子弛豫时间影响的双曲两步模型进行理论分析.通过飞秒激光热反射实验系统对金属薄膜材料进行了测量.利用偏振分光棱镜将飞秒激光分成抽运光和探测光,其中较强的抽运光用于加热金属薄膜而较弱的探测光用于探测薄膜表面反射率随时间的变化,两束光之间的光程差通过步进电机进行精确控制.利用金属薄膜反射率和电子温度的正比例关系就可以得到电子温度随时间的变化规律.实验发现在加热激光脉冲过后的电子温度下降区间会出现另一个较弱的电子温度波峰,并利用相同厚度的两块金属薄膜样品重复测量对实验结果进行了验证.理论上这一现象可以解释为金属薄膜中热波在背面反射的结果,并且实验结果和双曲两步模型给出的热波理论计算结果相符合.根据实验结果计算出热波传递速度约为5×105m/s,对应的电子弛豫时间为60fs.
王海东马维刚张兴王玮
Measurements of electron-phonon coupling factor and interfacial thermal resistance of metallic nano-films using a transient thermoreflectance technique被引量:3
2011年
Using a transient thermoreflectance (TTR) technique, several Au films with different thicknesses on glass and SiC substrates are measured for thermal characterization of metMlic nano-films, including the electron phonon coupling factor G, interfazial thermal resistance R, and thermal conductivity Ks of the substrate. The rear heating-front detecting (RF) method is used to ensure the femtosecond temporal resolution. An intense laser beam is focused on the rear surface to heat the film, and another weak laser beam is focused on the very spot of the front surface to detect the change in the electron temperature. By varying the optical path delay between the two beams, a complete electron temperature profile can be scanned. Different from the normally used single-layer model, the double-layer model involving interfaciM thermal resistance is studied here. The electron temperature cooling profile can be affected by the electron energy transfer into the substrate or the electron-phonon interactions in the metallic films. For multiple-target optimization, the genetic algorithm (GA) is used to obtain both G and R. The experimental result gives a deep understanding of the mechanism of ultra-fast heat transfer in metals.
王海东马维刚过增元张兴王玮
Theoretical calculations of thermophysical properties of single-wall carbon nanotube bundles
2011年
Carbon nanotube bundles are promising thermal interfacial materials due to their excellent thermal and mechanical characteristics. In this study, the phonon dispersion relations and density of states of the single-wall carbon nanotube bundles are calculated by using the force constant model. The calculation results show that the inter-tube interaction leads to a significant frequency raise of the low frequency modes. To verify the applied calculation method, the specific heat of a single single-wall carbon nanotube is calculated first based on the obtained phonon dispersion relations and the results coincide well with the experimental data. Moreover, the specific heat of the bundles is calculated and exhibits a slight reduction at low temperatures in comparison with that of the single tube. The thermal conductivity of the bundles at low temperatures is calculated by using the ballistic transport model. The calculation results indicate that the inter-tube interaction, i.e. van der Waals interaction, hinders heat transfer and cannot be neglected at extremely low temperatures. For (5, 5) bundles, the relative difference of the thermal conductivity caused by ignoring inter-tube effect reaches the maximum value of 26% around 17 K, which indicates the significant inter-tube interaction effect on the thermal conductivity at low temperatures.
缪婷婷宋梦譞马维刚张兴
关键词:THERMALCONDUCTIVITY
飞秒脉冲激光加热金属薄膜的理论和实验研究被引量:7
2011年
超短脉冲激光加热可应用于研究材料中载能子之间的超快相互作用,同时也广泛应用于超快激光加工.此前人们提出的双温度模型和抛物一步模型都只能用于描述超短脉冲激光加热金属薄膜后热量传递过程的特定片段.基于双温度模型和傅里叶导热定律,提出普适的理论模型可用于完整描述飞秒激光加热金属薄膜/基底时的整个热量传递过程.同时在300K温度下,采用背面抽运-表面探测瞬态热反射法实验研究了飞秒脉冲激光加热金属薄膜的热量传递过程,理论预测曲线和实验测量结果符合较好,验证了理论模型的正确性.基于此模型测量得到了金薄膜的电子-声子耦合系数和金/玻璃,金/碳化硅间的界面热导,测量结果和文献报道值符合较好.其中电子-声子耦合系数和体材料值接近,没有表现出明显的尺寸效应.界面热导比散射失配模型的预测值大,可能是电子参与界面导热、界面原子扩散及声子在界面的非弹性散射等造成的.
马维刚王海东张兴王玮
关键词:飞秒脉冲激光电子-声子耦合
共1页<1>
聚类工具0