The influence of scanning speed on hard bone tissue ablation is studied with a 10.6-μm laser. The groove morphology and the thermal damage created in bovine shank bone by pulsed CO2 laser are examined as a function of incident fluence by optical microscope following standard histological processing. The results show that ablation groove width,depth and ablation volume,as well as the zone of thermal injury,increase gradually with incident fluence. As compared to the result for high scanning speed,the lower scanning speed always produces larger ablation volume but thicker zone of thermal injury. It is evident that scanning speed plays an important role in the ablation process. In clinical applications,it is important to select appropriate scanning speed to obtain both high ablation rates and minimal thermal injury.
The feasibility of fenestration operation in middle ear bone with pulsed infrared laser is evaluated. Healthymale New Zealand rabbits in vivo are used in the experiment. Middle ear mastoid bone of animal modelis completely exposed with conventional methods, and then a pulsed CO2 laser （10.6 μm） and an Er:YAGlaser （2.94 μm） are used to perform the fenestration operation. Diamond drill is also used as a controlgroup. The total operation time and light irradiation time are recorded and the opening efficiency isassessed. The morphological changes and thermal damage around the opening window on the middle earbone are examined. It is shown that both laser systems are suitable for the fenestration operation inmiddle ear bone, and this no-touch technique has a lot of benefits compared with traditional methods.The bleeding during operation has an important effect on operation time and thermal injury and needs tobe controlled efficiently in further study.
