We study two flux qubits with a parameter coupling scenario. Under the rotating wave approximation, we truncate the 4-dimensional Hilbert space of a coupling flux qubits system to a 2-dimensional subspace spanned by two dressed states |01 and |10 . In this subspace, we illustrate how to generate an Aharnov-Anandan phase, based on which, we can construct a NOT gate (as effective as a C-NOT gate) in this coupling flux qubits system. Finally, the fidelity of the NOT gate is also calculated in the presence of the simulated classical noise.
Nb/Al-AlOx/Nb tunnel junctions with controllable critical current density Jc are fabricated using the standard selective Nb etching process.Tunnel barriers are formed in different oxygen exposure conditions (oxygen pressure P and oxidation time t),giving rise to Jc ranging from 100 A/cm2 to above 2000 A/cm2.Jc shows a familiar linear dependence on P × t in logarithmic scales.We calculate the energy levels of the phaseand flux-type qubits using the achievable junction parameters and show that the fabricated Nb/Al-AlOx/Nb tunnel junctions can be used conveniently for quantum computation applications in the future.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.
Superconducting nanowire single photon detector(SNSPD), as a new type of superconducting single photon detector(SPD), has a broad application prospect in quantum communication and other fields. In order to prepare SNSPD with high performance, it is necessary to fabricate a large area of uniform meander nanowires, which is the core of the SNSPD. In this paper, we demonstrate a process of patterning ultra-thin Nb N films into meander-type nanowires by using the nanoimprint technology. In this process, a combination of hot embossing nano-imprint lithography(HE-NIL) and ultraviolet nano-imprint lithography(UV-NIL) is used to transfer the meander nanowire structure from the NIL Si hard mold to the Nb N film. We have successfully obtained a Nb N nanowire device with uniform line width. The critical temperature(Tc) of the superconducting Nb N meander nanowires is about 5 K and the critical current(Ic) is about 3.5 μA at 2.5 K.
Besides serving as promising candidates for realizing quantum computing,superconducting quantum circuits are one of a few macroscopic physical systems in which fundamental quantum phenomena can be directly demonstrated and tested,giving rise to a vast field of intensive research work both theoretically and experimentally.In this paper we report our work on the fabrication of superconducting quantum circuits,starting from its building blocks:Al/AlOx /Al Josephson junctions.By using electron beam lithography patterning and shadow evaporation,we have fabricated aluminum Josephson junctions with a controllable critical current density(jc) and wide range of junction sizes from 0.01 μm2 up to 1 μm2.We have carried out systematical studies on the oxidation process in fabricating Al/AlOx/Al Josephson junctions suitable for superconducting flux qubits.Furthermore,we have also fabricated superconducting quantum circuits such as superconducting flux qubits and charge-flux qubits.
Switching current distributions of an Nb/Al-AlO x /Nb Josephson junction are measured in a temperature range from 25 mK to 800 mK.We analyse the phase escape properties by using the theory of Larkin and Ovchinnikov (LO) which takes discrete energy levels into account.Our results show that the phase escape can be well described by the LO approach for temperatures near and below the crossover from thermal activation to macroscopic quantum tunneling.These results are helpful for further study of macroscopic quantum phenomena in Josephson junctions where discrete energy levels need to be considered.
Measurements of three-junction flux qubits, both single flux qubits and coupled flux qubits, using a coupled direct current superconducting quantum interference device (dc-SQUID) for readout are reported. The measurement procedure is described in detail. We performed spectroscopy measurements and coherent manipulations of the qubit states on a single flux qubit, demonstrating quantum energy levels and Rabi oscillations, with Rabi oscillation decay time TRabi = 78 ns and energy relaxation time T1 = 315 ns. We found that the value of T Rabi depends strongly on the mutual inductance between the qubit and the magnetic coil. We also performed spectroscopy measurements on inductively coupled flux qubits.
