We introduce a corrected sinusoidal-wave drag force method(SDFM) into optical tweezers to calibrate the trapping stiffness of the optical trap and conversion factor(CF) of photodetectors. First, the theoretical analysis and experimental result demonstrate that the correction of SDFM is necessary, especially the error of no correction is up to 11.25% for a bead of 5 μm in diameter. Second, the simulation results demonstrate that the SDFM has a better performance in the calibration of optical tweezers than the triangular-wave drag force method(TDFM) and power spectrum density method(PSDM) at the same signal-to-noise ratio or trapping stiffness. Third, in experiments, the experimental standard deviations of calibration of trapping stiffness and CF with the SDFM are about less than 50% of TDFM and PSDM especially at low laser power.Finally, the experiments of stretching DNA verify that the in situ calibration with the SDFM improves the measurement stability and accuracy.
Since RGD peptides (R: arginine; G: glycine; D: aspartic acid) are found to promote cell adhesion, they are modified at numerous materials surface for medical applications such as drug delivery and regenerative medicine. Peptide-cell surface interactions play a key role in the above applications. In this letter, we study the adhesion force between the RGD-coated bead and Hela cell surface by optical tweezes. The adhesion is dominated by the binding of α5β1 and RGD-peptide with higher adhesion probability and stronger adhesion strength compared with the adhesion of bare bead and cell surface. The binding force for a single α5β1 -GRGDSP pair is determined to be 16.8 pN at a loading rate of 1.5 nN/s. The unstressed off-rate is 1.65 × 10-2s-1 and the distance of transition state for the rigid binding model is 3.0 nm.