Activated ceria(CeO2/γ-Al2O3) prepared by impregnation was characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), and hydrogen temperature-programmed reduction(TPR). The desulfurization of the activated ceria was investigated by X-ray photoelectron spectroscopy(XPS), Fourier transform infrared spectroscopy(FT-IR), and thermogravimetric analysis(TG). The results showed that ceria could be highly dispersed or crystallized on the surface of γ-alumina. The reduction temperatures of 0.1CeO2/γ-Al2O3, 0.45 CeO2/γ-Al2O3, and CeO2 ranged from 250°C to 470°C, 330°C to 550°C, and 350°C to 550°C, respectively. The reduction peak temperature of 0.45 CeO2/γ-Al2O3 was higher than that of 0.1Ce O2/γ-Al2O3, which was consistent with the reduction temperature of CeO2. O2 participated in the reaction between ceria and sulfur dioxide. The desulfurization product was cerium(III) sulfate. The intensity of the hydroxyl band decreased with the formation of sulfate species.
Qing-chun YuYong DengFei WangYue-bin FengXiu-min ChenBin YangDa-chun Liu
Desulfurization experiments of CuO, γ-Al2O3 and CuO/γ-Al2O3 were made in simulated flue gas by means of thermogravimetric analysis. It is found that reaction activities of CuO supported on γ-Al2O3 could be highly improved. Desulfurization kinetics of CuO/γ-Al2O3 was studied in the temperature range of 250 °C-400 °C and SO2 concentration of 0.1%-0.9%. The experimental data were tested and compared with kinetics models of volume reaction model(VRM), grain size model(GSM), random pore model(RPM) and pore-blocking model(PBM). Correlation analysis shows that VRM and RPM models do not fit experimental data well. GSM contradicts with the changes in the physical and chemical properties of Cu O/γ-Al2O3 as the desulfurization proceeds. It is found that PBM is consistent with the change of pore structure of CuO/γ-Al2O3 sorbent during desulfurization process and predicts the conversion-time curves of the sorbent well. Meanwhile, kinetics parameters are obtained and discussed.
