A mobile satellite communication system (MSCS) is a device installed on a moving carrier for mobile satellite communication. It can eliminate disturbance and maintain continuous satellite communication when the carrier is moving. Because of many advantages of mobile satellite communication, the MSCSs are becoming more and more popular in modern mobile communication. In this paper, a typical ship-mounted MSCS is studied. The dynamic model of the system is derived using the generalized Lagrange method both in the joint space and in the workspace. Based on the dynamic model, a nonlinear computed torque controller with trajectory planning is designed to track an aimed satellite with a satisfied transient response. Simulation results in two different situations are presented to show the tracking performance of the controller.
Jun Jiang 1 Bin Yao 2,3 Jian Guo 1 Qing-Wei Chen 1 1 School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China 2 School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA 3 State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
The tracking and stable control of a typical shipmounted mobile satellite communication system(MSCS) is studied.Unlike the former studies based on simplified single-axis models,a tri-axis nonlinear model including the kinematic and dynamic features of the MSCS is used as the control object.An adaptive robust controller with trajectory planning is designed to deal with large parametric uncertainties and uncertain nonlinearities of the system.A theoretic performance result is given and proved.The designed adaptive robust controller and other two traditional controllers are tested in the comparative simulations under three different situations.The simulation results show the tracking and stable validity of the proposed controller.
Aimed at the finite-time stabilization problem of a class of flexible manipulators,a finite-time state feedback stabilization controller was proposed in this paper.Firstly,the nonlinear model of flexible manipulators was transformed into linear system through the exact state feedback linearization,and then using the finite time stabilization control method of the linear system,a finite-time state feedback stabilization controller was designed for the flexible manipulators.Furthermore,it was proved that all the states of flexible manipulators could be stabilized to equilibrium in finite-time under the proposed controller.The simulation results show that the performance of the flexible manipulators under the proposed finite-time state feedback controller is better than the traditional state-feedback controller.The proposed finite-time stabilization controller can improve the performance of the flexible manipulators.
