采用原位聚合法制备锡酸钴（Co2SnO4）/聚苯胺（PANI）复合负极材料,用XRD、SEM分析物相结构与形貌,对复合材料进行恒流充放电、循环伏安及电化学阻抗谱测试。添加PANI可缓解Co2SnO4在充放电过程中的体积膨胀效应,使Co2SnO4/PANI体系的电子导电率与循环性能得到改善。以100 m A/g的电流在0.01--3.00 V循环,Co2SnO4/PANI复合材料的首次放电比容量为1 234.11 m Ah/g,第80次循环的放电比容量为817.36 m Ah/g。
To understand the influence of structure and atom sites on the electrochemical properties of Sn-based anode materials,the lithium intercalation–deintercalation mechanisms into SnNi2Cu and SnNiCu2phases were studied using the first-principle plane wave pseudo-potential method.Calculation results showed that both SnNi2Cu and SnNiCu2were unsuitable anode materials for lithium ion batteries.The Sn-based anode structure related to the number of interstitial sites,theoretical specific capacity,and volume expansion ratio.Different atom sites led to different forces at interstitial sites,resulting in variations in formation energy,density of states,and hybrid orbital types.In order to validate the calculated model,the SnNi2Cu alloy anode material was synthesized through a chemical reduction-codeposition approach.Experimental results proved that the theoretical design was reasonable.Consequently,when selecting Snbased alloy anodes,attention should be paid to maximizing the number of interstitial sites and distributing atoms reasonably to minimize forces at these sites and facilitate the intercalation and deintercalation of lithium ion.
