利用脉冲切换控制的平均驻留时间方法对基于模型的网络控制系统(Model-Based NetWorked Control System,MB-NCS)进行了研究.将基于模型的网络控制系统建模为一类脉冲切换系统;利用脉冲切换控制的平均驻留时间方法给出了使此脉冲切换系统指数稳定的充分条件;借助Lyapunov稳定性理论和线性矩阵不等式方法设计了使此脉冲切换系统稳定的控制器,并且通过仿真验证了所提出的方法的有效性.
Two new design approaches for constructing Low-Density Parity-Check(LDPC) codes are proposed.One is used to design regular Quasi-Cyclic LDPC(QC-LDPC) codes with girth at least 8.The other is used to design irregular LDPC codes.Both of their parity-check matrices are composed of Circulant Permutation Matrices(CPMs).When iteratively decoded with the Sum-Product Algorithm(SPA),these proposed codes exhibit good performances over the AWGN channel.
Error codes induced by M-ary modulation and modulation selection in network-based control systems are studied.It is the first time the issue of error codes induced by M-ary modulation is addressed in control field.In network-based control systems,error codes induced by noisy channel can significantly decrease the quality of control.To solve this problem,the network-based control system with delay and noisy channel is firstly modeled as an asynchronous dynamic system(ADS).Secondly,conditions of packet with error codes(PEC)loss rate by using M-ary modulation are obtained based on dynamic output feedback scheme.Thirdly,more importantly,the selection principle of M-ary modulation is proposed according to the measured signal-to-noise ratio(SNR)and conditions of PEC loss rate.Finally,system stability is analyzed and controller is designed through Lyapunov function and linear matrix inequality(LMI)scheme,and numerical simulations are made to demonstrate the effectiveness of the proposed scheme.
