In this paper, a photo-modulated transistor based on the thin-film transistor structure was fabricated on the flexible substrate by spin-coating and magnetron sputtering. A novel hybrid material that composed of Cd Se quantum dots and reduced graphene oxide(RGO) fragment-decorated ZnO nanowires was synthesized to overcome the narrow optical sensitive waveband and enhance the photo-responsivity. Due to the enrichment of the interface and heterostructure by RGO fragments being utilized, the photo-responsivity of the transistor was improved to 2000 AW^(-1) and the photo-sensitive wavelength was extended from ultraviolet to visible. In addition, a positive back-gate voltage was employed to reduce the Schottky barrier width of RGO fragments and ZnO nanowires. As a result, the amount of carriers was increased by 10 folds via the modulation of back-gate voltage. With these inherent properties, such as integrated circuit capability and wide optical sensitive waveband, the transistor will manifest great potential in the future applications in photodetectors.
An efficient interface modification is introduced to improve the performance of polymeric thin film transistors. This efficient interface modification is first achieved by 4-fluorothiophenol（4-FTP） self-assembled monolayers（SAM） to chemically treat the silver source–drain（S/D） contacts while the silicon oxide（SiO2） dielectric interface is further primed by either hexamethyldisilazane（HMDS） or octyltrichlorosilane（OTS-C8）. Results show that contact resistance is the dominant factor that limits the field effect mobility of the PTDPPTFT4 transistors. With proper surface modification applied to both the dielectric surface and the bottom contacts, the field effect mobilities of the bottom-gate bottom-contact PTDPPTFT4 transistors were significantly improved from 0.15 cm^2·V^-1·s^-1 to 0.91 cm^2·V^-1·s^-1.
A phase-only computer-generated holography（CGH） calculation method for stereoscopic holography is proposed in this paper.The two-dimensional（2D） perspective projection views of the three-dimensional（3D） object are generated by the computer graphics rendering techniques.Based on these views,a phase-only hologram is calculated by using the Gerchberg–Saxton（GS） iterative algorithm.Comparing with the non-iterative algorithm in the conventional stereoscopic holography,the proposed method improves the holographic image quality,especially for the phase-only hologram encoded from the complex distribution.Both simulation and optical experiment results demonstrate that our proposed method can give higher quality reconstruction comparing with the traditional method.
A method is proposed to realize accurate spatial complex modulation based on the spatial cross-modulation method（SCMM） via a phase-only spatial light modulator. The conventional SCMM cannot achieve high quality reconstruction, especially when the diffusion ratio is small. We propose an iterative algorithm in the calculation of a computer-generated hologram to implement accurate complex modulation. It enables us to generate a high quality reconstruction under a small diffusion ratio. The feasibility of the method is verified by both a numerical simulation and an optical experiment.
